I have a Police Force with suspected interconnect board problems. I believe these are game specific, so my question is: Will the interconnect board from my Whirlwind plug and play in my Police Force since both of these games are system 11B, or does something prevent these boards from interchanging. I would like to do this to see if the problem goes away, or if not, then I can rule out the interconnect board.

Thanks in advance for any help

some sort of problem with "pinball missing" errors. Checked everything 9 ways to Sunday, switches, actuators, connections. Spotty issues. It will play fine for a game, then decide in the middle of play that a pinball is missing. also intermittent problems with recognition that the ball is over. I put in my spare cpu board and same issue, so I ruled that out (unless it is one of those 6 roms that I had to move over to my spare board).

I figured I would try swapping the interconnect board and see if I still have the problem. The game is currently out on the route, so if I cannot fix soon, it will have to come back to the shop.

I will check that again dozer, but did look for that. All switches register one at a time in the switch edges test. but if you push 2 from that column at the same time, they do not register. same in switch levels test