Road Kings
Williams, 1986You're currently viewing posts by Pinsider grumpy.
Click here to go back to viewing the entire thread.
Quoted from jcar302:is the one taxman linked me to the same without a capacitor?
Yes, but this resistor network has nine resistors instead of eight so you need to cut off pin ten before you install it and make sure it doesn't touch the solder pad of the board.
Quoted from jcar302:So, originally is was a 10 pin, now i'm using a 9 pin and cutting one off making it an 8 pin, correct?
No, there is two versions that you can purchase a 10 pin and a 9 pin. If you find the 9 pin you don't cut anything you just install it with the dot of the pack lined up with dot on the board. And hole 10 on the board is not covered. If you purchase the 10 pin pack you cut off pin 10 and install with the dots lining up but now the pack covers the tenth hole on the board but can't touch the solder pad.
You're currently viewing posts by Pinsider grumpy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/system-11-src7src9-10-pin-resistor-network-substitute?tu=grumpy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
