You're currently viewing posts by Pinsider Pinballpiddler55.
Click here to go back to viewing the entire thread.
Have a rt jet bumper not working everything else on this pin works.
I so far have ran a jumper from the connector wire to the coil and it fired.
I went from the resister tab to ground
Got nothing.
I am not real sure how to check the leaf switch other than ohms.
I have been tracing wires and checking
Connectors,fuses. I would appreciate any help on what to search for thanks
Thanks robertmee,Iām glad you could
figure out my frustrated post.I do have a diode test on my meter and the cpu is an 11b.I just recently ran the solenoid diagnostics and the rt jet bumper coil fired.I have checked continuity on most all wires from the bottom of the Playfield
To the back box connectors.Is it likely a switch problem? Thanks again for you assistance!!
You're currently viewing posts by Pinsider Pinballpiddler55.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/system-11-rt-jet-bumper-not-working?tu=Pinballpiddler55 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
