(Topic ID: 232539)

System 1 problems

By hockeymutt

5 years ago


Topic Heartbeat

Topic Stats

  • 17 posts
  • 5 Pinsiders participating
  • Latest reply 5 years ago by hockeymutt
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    You're currently viewing posts by Pinsider cheddar.
    Click here to go back to viewing the entire thread.

    #3 5 years ago

    Watch this video for 1st time power on instructions:

    I know you've already turned it on but this is a good systematic approach

    #5 5 years ago

    Connectors are a serious concern with these (esp with battery damage) and anything that gets rid of the interconnect is a good thing. That's the main benefit of the pascal board. They are also rock solid and can be used in other games.

    If you know your powers supply is good then grabbing a rottendog, swemmer or a ni-wumpf will save you money. Be sure to recrimp the interconnect or replace it.

    All are good choices. They are not magic though, connectors and other issues still need to be addressed for it to be reliable

    #7 5 years ago
    Quoted from hockeymutt:

    Yea have corrosion on the connector right below the battery pins on order. Still haven't figured out the horn sound when powered on. Hoping it's the corroded connector. Got the game to coin up and kick out balls but nothing from the bumpers or flippers. Can get the numbers on the score to match to rise. Score will scroll and occasionally scroll from 0 and change to 8 and then they reset to zero. I have no 5 second delay when powered on

    no delay usually means slam tilt. Easily bypassed with a jumper

    You're currently viewing posts by Pinsider cheddar.
    Click here to go back to viewing the entire thread.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/system-1-problems-?tu=cheddar and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.