(Topic ID: 66091)

Swords Of Fury owners Club Fans Also Welcome


By Hellfire

6 years ago



Topic Stats

  • 1,197 posts
  • 167 Pinsiders participating
  • Latest reply 2 days ago by Chosen_S
  • Topic is favorited by 70 Pinsiders

You

Linked Games

Topic Gallery

There have been 446 images uploaded to this topic. (View topic image gallery).

20191016_202701 (resized).jpg
20191016_202711 (resized).jpg
20191016_202714 (resized).jpg
20191008_120103 (resized).jpg
18A03C8E-424B-4725-824D-F7904555DDE7 (resized).jpeg
03958A3C-9F5E-4B58-912E-615A161D84E7 (resized).jpeg
B8480022-5F41-4020-B236-4E8B8888B109 (resized).jpeg
EC61E978-DD61-46A2-A324-7E3C0E2D9C63 (resized).jpeg
BF12DA39-1A9C-4D0C-8458-A4440C5A703E (resized).jpeg
20190923_153050 (resized).jpg
20190514_120355 (resized).jpg
20190514_114813 (resized).jpg
20190704_180727 (resized).jpg
20190704_174018 (resized).jpg
20190514_114504 (resized).jpg
20190514_114502 (resized).jpg

There are 1197 posts in this topic. You are on page 24 of 24.
#1151 4 months ago

I think Titans have better bounce on the flippers than any other non traditional rubber I’ve tried. I like them.

#1152 4 months ago

I love when pinball sneaks up in my kid’s creativity

2232B936-23A1-4ABC-A8C7-3728F11B2DCE (resized).jpeg
#1153 4 months ago
Quoted from CaptainNeo:

titans suck. All those non rubber ones blow serious ass when it comes to gameplay. Sure they look great, but sucks to play on. Especially the flippers. Rubber or nothing.

Thanks for your input.

I only use regular white old fashion regular rubber on the playfiled. Better bounce on older games. BUT on the flippers the titans to me play as close to regular rubber then any other silicone rings. They are different I agree, but to me not enough to worry about in the home environment. Plus the colors look nice.

#1154 4 months ago
Quoted from rottenrobert1313:

Thanks for your input.
I only use regular white old fashion regular rubber on the playfiled. Better bounce on older games. BUT on the flippers the titans to me play as close to regular rubber then any other silicone rings. They are different I agree, but to me not enough to worry about in the home environment. Plus the colors look nice.

I guess it depends on how often you play out. If you play at others houses a lot for league and play tournaments a lot. it's a huge change. It's not something you want to get used to. If you only play at home all the time, then it doesn't effect you much.

#1155 4 months ago

Black Rubbers, LIONMAN!

#1156 4 months ago
Quoted from Chosen_S:

Black Rubbers, LIONMAN!

FREE THE TITANS!

In this case...titan blue rubbers.

1 week later
#1157 4 months ago

Ok...I'll be honest....I'm starting to second guess the blue titan rubbers. Not because they way they play, but because I might have over done the game with blue.

20190608_202859 (resized).jpg
#1158 4 months ago

Seems fine on the pic, blending with the wall.
Still hating those repro slingshots colors
Where did you get the new upper flipper?

#1159 4 months ago
Quoted from Nihonmasa:

Seems fine on the pic, blending with the wall.
Still hating those repro slingshots colors
Where did you get the new upper flipper?

That's what I was going for. I thought blue posts with white rubbers for castle wall look.

Yeah the sling colors are dark, but still better then the old ones I took off.

The upper flipper I ended up using a plastic spray paint. The finish came out great, but the white in the 3inch flippers are a shade different in color. Close as I can get it. This game was in real bad shape when I got it.

#1160 4 months ago

Here's some before and after. I'll do it all over again if the hardtop comes out for this game.

20190517_164738 (resized).jpg20190531_185843 (resized).jpg20190517_164808 (resized).jpg20190608_182939 (resized).jpg20190517_164747 (resized).jpg20190608_181918 (resized).jpg20190517_164907 (resized).jpg20190608_182535 (resized).jpg
#1161 4 months ago

Hardtop is planned from what I saw on the topic.
Mine is apart right now, sent the playfields to this guy :

https://www.2niro-pinball.com/

Yours look very similar to mine, wear in the same spots
Am also planning to go with the blue posts but red titans to balance colors out.

#1162 4 months ago

Looks fantastic.

blue frames the orange very well

#1164 4 months ago

Which starposts are those? Do you think they are light blue or do they have a hint of yellow in them?
-mof

#1165 4 months ago

They are the light blue. Got them from Marco , but got the last of them. Had just enough to use on my game.

https://www.marcospecialties.com/pinball-parts/03-8319-30

#1166 4 months ago
Quoted from rottenrobert1313:

Here's some before and after. I'll do it all over again if the hardtop comes out for this game.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

I like how you did the prismatic drop decals in the colors. Looks good.

#1167 4 months ago
Quoted from CaptainNeo:

I like how you did the prismatic drop decals in the colors. Looks good.

Thanks. I can't take the credit for it though. Someone earlier in the thread did it and I liked the way it looked, so I did the same

I can tell you what wasn't fun was the jackpot sticker on top of the drops. Mine was peeling up so I took it of and scanned it. Now I'm no good on a computer and have no idea how to go about photo shop. So..I used Windows paint and pixel by pixel re- colored and printed a sticker on sticker paper. Took forever and sucked so bad, BUT I like the way it turned out.
20190603_183840 (resized).jpg20190603_184055 (resized).jpg

#1170 4 months ago

So I have a question. I put 89 flasher LED's in the game and when I flip the flippers some on the playfiled flicker on and off real quick. So...what would cause that to happen? I assume it's a diode somewhere allowing the flipper voltage to backfeed a few of the flashers. Just not sure where to check?

#1171 4 months ago
Quoted from rottenrobert1313:

So I have a question. I put 89 flasher LED's in the game and when I flip the flippers some on the playfiled flicker on and off real quick. So...what would cause that to happen? I assume it's a diode somewhere allowing the flipper voltage to backfeed a few of the flashers. Just not sure where to check?

https://pinside.com/pinball/forum/topic/adding-led-flashers-to-system-11-games

#1172 4 months ago

Thank you. I figured it was something to do with diodes. I already have what I need so this isn't to bad to fix.

#1173 4 months ago

I joined the SoF club this weekend. Pin needs some work and to be shopped, but a good project pin. I noticed it appears to have roms labeled "proto" any reason to save these rom files? Could anyone send me the patch to the updated L2 roms? Thanks!

#1174 3 months ago
Quoted from Nihonmasa:

Hardtop is planned from what I saw on the topic.

Yes, planned but the company is the worst when it comes to communication; ZERO details to date. Patiently waiting for two here. I may have to proceed with sealing the PF, painting touch ups and clearing over. I've really not wanted to go down that road as I have no experience with it. Unfortunately one of the SoF is PF stripped and waiting, waiting, waiting...

Hopefully we hear soon on the Hardtop.

#1175 3 months ago

Does anyone happen to know the SoF resistance values for r2-r12 on the interconnect board? Mine are very crispy, some have failed and the schematic is illegible. They seem to be game specific for each sys11. thanks!

#1176 3 months ago

SDTM Cary Hardy is at it again in Part 3 of Saving Swords of Fury

Will it turn on? Will it catch fire? Lionman?

#1177 3 months ago

I'm a new proud owner of Swords of Fury. Is there a schematic available? Thanks!

#1178 3 months ago
Quoted from Seamlesswall:

I'm a new proud owner of Swords of Fury. Is there a schematic available? Thanks!

Can be downloaded from the International Pinball Database here....

https://www.ipdb.org/search.pl?any=Swords+of+Fury&search=Search+Database&searchtype=quick#2486

#1179 3 months ago
Quoted from Beebl:

Does anyone happen to know the SoF resistance values for r2-r12 on the interconnect board? Mine are very crispy, some have failed and the schematic is illegible. They seem to be game specific for each sys11. thanks!

Just in case anyone was wondering this is what the resistors on my interconnect turned out to be...

R1: jumper - changed to 11 ohm to use standard 89 flasher in mini playfield
R2: 5.6o
R3: 5.6o
R4: 11o
R5: 11o
R6: 11o
R7: 11o
R8: 11o
R9: 5.6o
R10: 4o
R11: 11o
w/r 12: jumper

#1180 3 months ago

I just started tearing down my, new to me, Swords of Fury it's missing a thin bumper post to the right of the center ramp. Anyone know specifically what it is and who sells it? A few other problems - cracked but repairable ramps, bubble lifting on the mylar, typical GI connector burn then a hack repair with speaker cable but for 350 bucks for a functioning game why would I complain?

#1181 3 months ago
Quoted from Seamlesswall:

I just started tearing down my, new to me, Swords of Fury it's missing a thin bumper post to the right of the center ramp. Anyone know specifically what it is and who sells it? A few other problems - cracked but repairable ramps, bubble lifting on the mylar, typical GI connector burn then a hack repair with speaker cable but for 350 bucks for a functioning game why would I complain?

I don’t see cracked ramps as a problem - it’s an opportunity! Freeplay40 ramps in either clear or in transparent red. Mark’s ramps are top notch and better than OEM. I put the clears on mine and really brightened up that corner of the game.

Nice find though.

2 weeks later
#1182 3 months ago

Swords is up and running very fun game, enjoy the "game to game" jackpot values. Rebuild issues were upper flipper rod never had a nylon sleeve in upper play field. Although functional, the flipper was a little loosy goosy. Have no idea if it originally had one designed in but it does now. Aside from the usual tear down cleaning/waxing replaced all with 47's. In the Magic Tunnel I need to get a nice bright LED bayonet bulb in there. Any suggestions?
One odd thing I ran into, the displays were factory mounted a little high so from my vantage point the upper segments were slightly cut off making it annoying to look at. Fixed that problem right off...
Epoxied and fiberglassed the bottom of ramps where cracks were - using leftover kayak wooden boat epoxy and fine fiberglass.

1 week later
#1183 81 days ago

Out of the club sadly, but you can only fit so many..goodbye lionman...

1 week later
#1184 72 days ago

Anybody who's done a plastic swap have a spare one of these? My shooter lane plastic is broken in two places.

IMG_20190807_211832894 (resized).jpg

Left sling has a rubbed-off spot and right sling has a crack, so I wouldn't mind those either, but not critical.

Have considered a full repro but everything else looks nice, and I feel there's value in originality of some of this stuff.

(Yes, my rubber configuration is wrong, and so is the hardware. One day I will fix this.)

#1185 72 days ago

Gave my lionman a toupee.

51A71076-D5CC-4EC2-8189-8E2CE22D1BE7 (resized).jpegBFAE8C82-58F1-4CF8-984A-9999D22AEC1A (resized).jpeg
#1186 72 days ago
Quoted from mof:

Looks fantastic.
blue frames the orange very well

Does no one get this game!?

It’s a dungeon crawler, blue?? Orange?? White??

Black all the way, even if they’re titan. The game is supposed to be dark, mysterious, and maybe have some fire flickering leds in some places. All this color is messing up the theme in my opinion.

Quoted from rottenrobert1313:

Thanks. I can't take the credit for it though. Someone earlier in the thread did it and I liked the way it looked, so I did the same
I can tell you what wasn't fun was the jackpot sticker on top of the drops. Mine was peeling up so I took it of and scanned it. Now I'm no good on a computer and have no idea how to go about photo shop. So..I used Windows paint and pixel by pixel re- colored and printed a sticker on sticker paper. Took forever and sucked so bad, BUT I like the way it turned out.
[quoted image][quoted image]

I make the decals for the ramp and the drop targets that you made, great job on that one! I had found the original font I think a few years ago when freeplay40 started making the ramps.

#1187 67 days ago

Help....

I have taken my SOF completely apart and have somehow lost all my pictures. Don't ask me how. Would anybody sit on pictures taken on
in the process of dismantling your SOF ?

Would be much appreciated if someone could share, or I'm facing a tedious jigsaw puzzle...

Thanks
Matt

#1188 67 days ago

Here's all I have

20190507_190855 (resized).jpg20190511_194508 (resized).jpg20190511_194512 (resized).jpg20190511_194740 (resized).jpg20190511_194746 (resized).jpg20190511_194750 (resized).jpg20190511_194743 (resized).jpg20190511_194818 (resized).jpg20190512_221846 (resized).jpg20190513_175223 (resized).jpg20190513_175227 (resized).jpg20190513_175232 (resized).jpg20190513_180205 (resized).jpg20190513_180400 (resized).jpg20190513_180510 (resized).jpg20190513_180627 (resized).jpg20190513_181406 (resized).jpg20190513_181408 (resized).jpg20190513_181414 (resized).jpg20190513_181415 (resized).jpg20190513_181417 (resized).jpg20190513_181419 (resized).jpg20190513_181422 (resized).jpg20190513_181421 (resized).jpg20190513_181423 (resized).jpg20190513_181425 (resized).jpg20190513_181427 (resized).jpg20190514_113818 (resized).jpg20190514_114502 (resized).jpg20190514_114504 (resized).jpg20190514_114813 (resized).jpg20190514_120355 (resized).jpg20190522_154720 (resized).jpg20190522_154723 (resized).jpg20190522_154728 (resized).jpg20190522_154730 (resized).jpg20190522_154735 (resized).jpg20190522_154738 (resized).jpg20190522_154740 (resized).jpg20190522_154743 (resized).jpg20190522_154745 (resized).jpg20190522_154746 (resized).jpg20190522_154748 (resized).jpg20190522_154751 (resized).jpg20190522_154753 (resized).jpg20190522_154755 (resized).jpg20190522_154757 (resized).jpg20190609_200047 (resized).jpg20190610_114223 (resized).jpg20190610_114227 (resized).jpg20190704_174016 (resized).jpg20190704_174018 (resized).jpg20190704_180727 (resized).jpg
#1189 67 days ago
Quoted from Flippermatt:Help....
I have taken my SOF completely apart and have somehow lost all my pictures. Don't ask me how. Would anybody sit on pictures taken on
in the process of dismantling your SOF ?
Would be much appreciated if someone could share, or I'm facing a tedious jigsaw puzzle...
Thanks
Matt

I’ve got some. If you pm me your email I’ll send through what I have too.

#1190 67 days ago
Quoted from Nihonmasa:

Here's all I have

Nice Avatar! Fast becoming my favourite pin.

1 month later
#1191 25 days ago

Got my pf touched up and cleared!
Will look sweet

20190923_153050 (resized).jpg
1 week later
#1192 17 days ago

Hi guys, putting back my pin together, and wondering if anyone would have pics of the mini pf without the plastics so that I can see what goes where?
Would be very much appreciated!

#1193 13 days ago
Quoted from Nihonmasa:

Hi guys, putting back my pin together, and wondering if anyone would have pics of the mini pf without the plastics so that I can see what goes where?
Would be very much appreciated!

Just finished my restoration. Here you go and a couple of my finished product.

18A03C8E-424B-4725-824D-F7904555DDE7 (resized).jpeg03958A3C-9F5E-4B58-912E-615A161D84E7 (resized).jpegB8480022-5F41-4020-B236-4E8B8888B109 (resized).jpegEC61E978-DD61-46A2-A324-7E3C0E2D9C63 (resized).jpegBF12DA39-1A9C-4D0C-8458-A4440C5A703E (resized).jpeg
#1194 13 days ago

Really nice!
Thanks for the pics! Just got back on it today so that's perfect timing

#1195 11 days ago

Putting back mine together and now I am the one in need of some pics

Main playfield only without plastics would be of great help!
Here is the current condition:

20191008_120103 (resized).jpg
1 week later
#1196 2 days ago

And it's alive again!!
Really glad with the result

20191016_202701 (resized).jpg20191016_202711 (resized).jpg20191016_202714 (resized).jpg
#1197 2 days ago
Quoted from Nihonmasa:

And it's alive again!!
Really glad with the result [quoted image][quoted image][quoted image]

Woah, that rock work is super cool

Promoted items from the Pinside Marketplace
$ 19.95
Playfield - Toys/Add-ons
ULEKstore
$ 14.99
Electronics
PinballElectronics.com
$ 11.95
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
$ 20.00
Electronics
Yorktown Parts and Equip
From: $ 18.00
Apparel - Men
Pinside Shop
$ 50.00
There are 1197 posts in this topic. You are on page 24 of 24.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside