Bridge rectifier BR1 is blown.
You're currently viewing posts by Pinsider slochar.
Click here to go back to viewing the entire thread.
Have you checked for shorts on the connectors involved? Didn't review entire post to see if you've already powered up with the connectors disconnected to the outputs.... remove as much as possible from the circuit (ideally, you should just have the bridge in the circuit with the cap if possible.... check for fuse blowing (possibly build a circuit breaker type fuse in there to save some $$$ on troubleshooting here, or rig up a bulb like some do). Depending on the circuit you might have to remove connectors from the housings to isolate the circuit, but most IIRC have separate input connectors from the outputs.
You're currently viewing posts by Pinsider slochar.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/swords-of-fury-fuse-f7-blows-?tu=slochar and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.