I removed my ramp to give a little info to freeplay40 to help with measurements for new ramps, I put it back together and forgot to plug in the connectors under the pf, a few weeks later I turn it on to play a game, I notice there's issues. I open er up, see the connectors and plug them back in. Now... My drop targets won't reset properly, they reset very randomly about 5 games in, and reset only once in the game. The coils test good individually when in coil test.
I pulled the assembly and put new targets in, cleaned everything reflowed solder on the connector pins and the optos. and put it back together. I made sure there was continuity between the connector wires, still having the same issues.
Any help? Any ideas?
Thank you!