The top roll over button did not work until I disconnected the capacitor. I replaced the diode and capacitor but it only worked properly when I removed the capacitor. Any thoughts?
Also, the lower roll over button builds up to extra ball however does not give extra ball. New mpu and driver board. I need to repin all connectors but maybe something else I can try first?
Quoted from dsquared_314:The top roll over button did not work until I disconnected the capacitor. I replaced the diode and capacitor but it only worked properly when I removed the capacitor. Any thoughts?
Also, the lower roll over button builds up to extra ball however does not give extra ball. New mpu and driver board. I need to repin all connectors but maybe something else I can try first?
What game?
the capacitor was shorted internally?
dip switch settings for whatever game it is you are having issues with?
Quoted from dsquared_314:lower roll over button builds up to extra ball however does not give extra ball.
DIP Adjustment:
Sw. 14
Sw. 15
Both need to be "ON" for Hyper Space (XBALL)
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/switch-diode-and-capacitor and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Rochester, NY