Ok..this is my first pin...everything is working pretty well. Here is my newb question...I've had it for a few months now. Sometimes the left loop switch would stick, and if the ball drained out the right outlane, another switch would close. I switched out the left loop switch for a new one and all is well and is no longer sticking...now my question...
If those 2 switches are both held down manually in switch edge mode, it activates the right ramp exit 2 switch...is that normal? The diodes are all facing the correct location (black side facing the white wire and silver bar by itself on the last leg of the switch) I am not sure if its just because the 2 switches are open together, that it causes that issue to occur...thank you and I hope this makes sense!!
Dan