Does that include the 500 Point rollovers?

Does it reset the target bank when the ball goes in the hole at the top right of the playfield?

Be careful because this circuit runs on 120 volts

I think you'll find that the Target Bank resets every time the Motor runs (After the 1st Ball relay (U) is activated). Check this switch on the 5000 Point And Target Bank Reset relay (G)

For a switch to work 3 things are necessary:
1) When open, there should be a small space between the contact points (duh)
2) When closing, the long blade's contact point should push the short blade's contact point enough to move the short blade
3) The contact points should be clean, which they usually will be if #2 is happening

pasted_image (resized).png