Batman Forever
Sega, 1995You're currently viewing posts by Pinsider Terminatrix.
Click here to go back to viewing the entire thread.
Hey Guys just bought a Batman forever. Currently pulling apart to re-powder coat & Led everything & a few other little mods. Does anyone know where I can find the Apron Decals ? As mine are in pretty bad shape with old service stickers all over them.
Hi everyone I posted here a few months ago trying to locate some Apron decals for my Batman Forever. Was unable to locate any so had some custom ones designed & printed & then Powdercoated my Apron & ramps ( actually everything) - hope you like thanks
4D130E7A-ACA8-4AB7-96C7-859BEE00B622 (resized).jpegB8331A78-9D75-405D-841A-41A8F6676D2E (resized).jpegQuoted from Colsond3:That looks sweet! Where did you get the emblem on the coin door?
I found it on eBay for about $5 - I also put one each on the speakers & powdercoated same color as the ramps
Ok so I think my Batman Forever is now finished - list of mods that I can remember
Powder coated Legs , Hinges , Siderails , Coin door , Gun handle Plate , Lockdown Bar , Leg levellers ,Apron ,
all bolts & custom Alloy Backbox surround in Illusion Purple
All Wire Ramps & Bat logos Powder coated in Mettalic Illusion Sour Apple
Coin taker Led’s above & below Playfield , Backbox & start buttons & coin slot
Color DMD
Battery eliminator
Custom Apron decals
Speaker Led’s ( & Bat logos )
Re-built Power board
Flippers re-built x3
Purple Flippers x3
Green Led Flipper buttons
Green super bands
New rubbers ect
New Targets & decals
New HD Glass
New Slingshot plastics x2
Purchased Manuel & Flyers
New Batman Balls ( Kapow & Boom )
Cup holder
Leg protectors
Game Blades
3 little Toppers ( excuse the quality as I’ve been trying to get a custom topper for over 4 months now but they keep letting me down )
Pinsound package to come providing they release a re-mixed sound package & Shaker
It’s Christmas morning here & I think I’ve spent enough now time to enjoy after 3 months
Quoted from jsm172:Where did you get those speaker lights or decals?
Speaker LEDs from Marcos Specialties - Batman logo from eBay anywhere from $1-$5 ea then I had them powder coated
FB18EAB5-B12F-4803-879D-0858E5FDC59B (resized).jpegQuoted from jsm172:So did you just put adhesive backing on them and stick them on the speaker panel?
Yes they come with double sided tape already cut to the shape of the logo
Quoted from jsm172:So did you just put adhesive backing on them and stick them on the speaker panel?
In hindsight I should of ground off the eyes prior to powder coating but you can’t really notice them once the speaker lights are on
0FCEB106-B769-444C-9DDE-23FEF19917BC (resized).jpegQuoted from MustangPaul:You forgot my blue leg Lights and Pincup light and one of these.
[quoted image][quoted image][quoted image][quoted image][quoted image]
Wow they do look pretty cool but I do prefer a more stealth gun handle - what do your cup holder lights look like ? Thanks
Hi guys found this Batman Forever for sale & noticed on closer inspection a small plastic cover with decals on it in the top right hand corner on top of the U turn shaped green plastic ramp. I don’t have one of these does anyone else or is this an after market mod ?
A644BA1D-1521-4E1E-9435-2A1CBF966831 (resized).pngQuoted from hd60609:Anyone try these yet? Or the clear ones?
https://www.pinballlife.com/mm5/merchant.mvc?Screen=PROD&Product_Code=PBL-300-0114-00[quoted image]
I put these on last week & they look awesome. Took pictures to put up but very hard to see how good they look in real life. Had a bit of trouble taking the bat wing off & on - & the top right one required longer screws after installing but well worth it for a cheap mod
Put this topper on today. A licensed DC comics Bat signal & before anyone says its the wrong Bat logo yes I know - comes with 3 interchangeable Bats & of course mine was missing 1 of 3 Bats. Apart from that I think it’s pretty cool & looks better at night shining on the ceiling as well.
244140E4-D540-438F-AD26-469F8668E299 (resized).jpegQuoted from hd60609:Post those pics!
Here’s one I took last week I’ll try to get better ones later
2EBA3061-7637-4508-B987-6BE94FA55D97 (resized).jpeg9957C11D-02A4-45DF-BB74-D430B84A31B7 (resized).jpegQuoted from izzy:Looks great! Where did you get your color DMD?
DMD is from Color DMD they don’t actually have a file for it yet ( still waiting ) the game is all one colour but scores & Sega logo etc are in color
/
Quoted from izzy:Thx. That's just lazy on their part. Hopefully they will do the game.
again, thx
Actually they haven’t done the game yet but it’s a start that they at least have made a DMD to suit as you probably know there’s 4 other machines that share the same DMD & I think that may have done 1 of those games already so only a matter of time before they get around to it
Quoted from robx46:So I shopped my game, put it back together, now the ball won't sail around the apron. Hits the start of the opened up area, then right down the drain. Half the time it goes all the way around, half the time it drains. Super frustrating as I know the launcher is firing clear, new sleeve, etc. I've tried adjusting the ramp, bending it, washers under all bolts, none of the bolts, some of the bolts. Nothing I do gives me 100%. Surely somebody has had this issue before? Must be some way I can bend this thing. I've also tried raising & lowering incline, no difference.
Mine does that every now & then - ideally an enclosed wire ramp would of solved that issue - I just live with it
I had one of these installed the other day. Was having a lot of trouble getting the ball up the left ramp. It would go up 1/2 way & then roll back down 8 out of 10 times. Old coils were tested & seemed to be ok , flippers were rebuilt , new flippers & new rubbers put in & pitch for the machine was as it should be. After this went in I’m making the shot 9 out of 10 times so we’ll worth the upgrade.
9CC0F7D9-2047-429C-BC24-F1946E1A07D5 (resized).png
Hey everyone here’s a little project I’ve been working on for the past 3 months. A Pinsound custom orchestration with original themes & music from the movie as well as several other Batman related music clips. Something different as well with a Shaker added to specific SFX
Quoted from Colsond3:That is awesome. Does it play the whole U2 song? Now you’re making me really regret selling my BF a few months ago.
Yes plays the whole U2 song that’s the main play song for the game. Was unable to play a game while holding the phone . I should of cranked the sound up prior to recording.
Quoted from Colsond3:That’s interesting. I like the soundbites you have, but it seems like the reconfigured audio is confusing the flashing circuit that is usually synchronized with the endgame sequence?
Yes I think your right it’s like the flashers are on steroids. Not sure why but I think there’s always going to be glitches when mixing old technology with new. It’s certainly not flawless but it’s something different which is what modding is all about.
Quoted from Cdonnerusmc:Finally got her back on the line. Does anyone make plastic question marks for the speakers? I'd love to light up the speakers ,and thought it would be cool to have some plastic question marks inside. Also thinking of adding green apple T moulding to the head.
[quoted image][quoted image]
All your machines look awesome all lined up & powder coated. Just wondering why the coin doors weren’t done at the same time. Great setup you have.
You're currently viewing posts by Pinsider Terminatrix.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/suppose-we-flipbatman-forever-club?tu=Terminatrix and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Melbourne