(Topic ID: 285107)

Super weird Bally 35 no boot

By mongi

3 years ago


Topic Heartbeat

Topic Stats

  • 23 posts
  • 7 Pinsiders participating
  • Latest reply 3 years ago by mongi
  • Topic is favorited by 2 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    20210106_121119 (resized).jpg
    image (resized).jpg

    You're currently viewing posts by Pinsider mongi.
    Click here to go back to viewing the entire thread.

    #1 3 years ago

    OK guys I got a real head scratcher. I picked up a stern stingray not working. MPU light stuck on. Had a Bally 35 with 2716 roms. all voltages and grounds are where they’re supposed to be. Put my board in from my flash Gordon in the game boot it up displays work fine. It has 2532 roms. I repaired the board corrosion on the one that came with the game, make sure it was jumped properly in the game will bench boot fine with six flashes. The problem I’m having is when I put it in the stingray all I get is the brief flash. Nothing else. I also put in my stern M 200 board that has four new 2716 roms and boots fine.So my dilemma is I now have two Bally 35 boards jumped to accommodate 2 - 2716 Roms at U2/U6 And neither board will boot in the game. Both boards will boot on the bench with 6 flashes.I even tried new ROMs and it didn’t make a difference. Is it possible This board won’t work with that set up? I have extra 2532 roms But no burner.It’s driving me nuts. Any help would be appreciate it

    image (resized).jpgimage (resized).jpg
    #3 3 years ago

    Hi, thanks' for you input. I don't have a programmer, I bought the rom's from Marco. Can you recommend a programmer and what rom's for me? I do have 3 2532's I can use.

    #5 3 years ago

    Thanks, I am powering right at the J4 plug and it makes no difference.What I understand is Bally 35 won’t work on an early stern. I have a stern 100 board I’m going to get working and try that with the 2716”s.

    #10 3 years ago

    Hey guys it’s definitely the roms are not burned correctly. I have like 10 boards and I actually tried a set of ROMs from in stern electroamo and the board that’s giving me the problem and it boots now in the game with game play. It must be pulling down the 5 V, I even tried different power supplies with no luck with the original two rams that were giving me a headache. So here’s the thing I’m looking to get a burner ,what is a good suggestion. I have a $250 Amazon gift card to use. I know the 2716’s used 21 Volts to burn. This is not the first time I had problems with Roms. Marco is going to send me another set this week.I want to thank everybody for reaching out to me with help I really appreciate it.

    #23 3 years ago

    Well Marco is sending me another set of Roms. I explain to Kyle who does their burning About what’s going on,and he is going to burn nose like three times over. I’ll keep you guys posted when I get the ROMs and let you know what happens.

    You're currently viewing posts by Pinsider mongi.
    Click here to go back to viewing the entire thread.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/super-weird-bally-35-no-boot?tu=mongi and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.