(Topic ID: 173231)

Super Chexx Board Decals *gauging interest*


By flashinstinct

2 years ago



Topic Stats

  • 45 posts
  • 21 Pinsiders participating
  • Latest reply 2 years ago by Code_Blue
  • Topic is favorited by 3 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 8 images uploaded to this topic. (View topic image gallery).

    chexx-3 (resized).jpg
    chexx-2 (resized).jpg
    chexx-1 (resized).jpg
    Untitled-1 (resized).jpg
    20161110_155812 (resized).jpg
    20161110_155808 (resized).jpg
    board-sample (resized).jpg
    board-sample2 (resized).jpg

    You're currently viewing posts by Pinsider flashinstinct.
    Click here to go back to viewing the entire thread.

    #1 2 years ago

    Can someone give me the dimensions of the boards all around. I want to try and make some promotional boards with some of the decal material I have been using?
    Something along these lines:

    If I end up with more than 20 takers the person giving me measurements will receive a free set. Price will be set at $25 per set.

    board-sample2 (resized).jpg
    board-sample (resized).jpg

    UPDATE:
    I will create roughly 36 different board pieces. People will get to choose the pieces to fill their rink. X will be mandatory as they will include the blue and red lines.

    #3 2 years ago

    Now I just need 20 people . Thanks for the measurements any chance you can measure from end of to middle of blue line so I can integrate the lines on the boards pls.

    #5 2 years ago

    Talking about the blue lines how far are they from centre? Wondering as well why the boards don't go further out? Visibility issue? I want to extend these as far as possible. I could also put these on clear with white blocker and have them go all the way around with a half translucent yellow base so you could see the puck from the back I was hoping for the measurements from net to net

    #8 2 years ago

    I don't mind putting any logo as long as everyone agrees. Needs to be pretty general to be somewhat international. I just thought exlax and juicy fruit made slogan was funny same thing with Viagra and mcdicks slogan was funny. I did want to put Dukin donuts and a FBI logo together lol

    #12 2 years ago
    Quoted from northvibe:

    In theory you could put boards all the way around. To fit right, you'll probably want to make them into sections.

    I want to go all the way around the ice and have the ice ends be half opaque / half transparent. The yellow part of the boards will be transparent so people can see the puck if it's stuck on the side of the boards but the upper part will be opaque like the sides to put more ads. I just need enough interest to start going.

    Untitled-1 (resized).jpg

    #14 2 years ago
    Quoted from Spencer:

    I went all the way around and added the yellow board as well. I love the way it looks and would recommend to anyone as a great upgrade.

    In your honest opinion, do I really need the transparent bottom at the ends of the rink?

    #22 2 years ago

    I still need someone to give me the measurements of the entire perimeter of the boards. This could be finalized as soon as this week and starting shipping next week. Just need measurements. height of boards, length of boards (all the way around)

    #26 2 years ago
    Quoted from NYG:

    All the way around is 133"
    height of board is 1.4" white part
    yellow part is additional .3"
    other thing to take in is behind the goal has a ramp so puck does not get stuck and in two of the corners
    but it looks like pictures from spencer the boards have room to mount them behind these ramps

    Thanks

    Quoted from eharan:

    I would be interested if the logos were different from the ones shown

    These were just samples. Doing the real deal today.

    #30 2 years ago

    133"... now that I think of it seems really long... 11.3ft to be exact. Can anyone confirm that? And can anyone confirm the height. 1.7" or in mm is fine too. I still also need distance of blue lines from center ice as well as the width of the blue and red lines.

    Quoted from Stal8080:

    To OP I'd be interested if you could choose own logos.....thanks

    I will create roughly 36 different board pieces. People will get to choose the pieces to fill their rink. X will be mandatory as they will include the blue and red lines.

    #31 2 years ago
    Quoted from Zaquar:

    Just curious....What would it cost if I wanted a set using all logos that I chose / provided? Thinking along the lines of past companies / small businesses my family has been involved in over the years....maybe mixed with some others. I could provide file in whatever format you'd want for printing.

    It would not be profitable as it would take about 1.5 hours if not more to find the logos (hopefully all vector) and then getting only one printed would take the RIP time, plus printing time, plus lamination time. You wouldn't see anything under $200 at the very least. When I do these I do them in bulk 100 sets. It makes it more affordable for everyone.

    #36 2 years ago
    Quoted from Spencer:

    I bought it off someone else, can't remember if it was Pinside or not. It has double sided tape on it and was a bitch to line-up, bend and install straight. The results are worth it though.

    Spencer you mind giving me the height of the damn board LOL. I'm integrating the yellow board with my design. The decals I am doing will be in 7" pieces that way they will be easy to line up and keep the entire thing straight.

    #39 2 years ago
    Quoted from Spencer:

    The yellow trim? the decal? both? What are you looking for? Just let me know and I'll measure it up.

    The entire height combining the yellow piece and then the entire length around the boards. I also need the distance between centre ice and the blue line along with the sizes of the red and blue lines.

    #44 2 years ago
    Quoted from northvibe:

    did you get the measurements? My chexx is on route, but I could try and make a stop sometime soon.

    Problem is I've received two sets of measurements and they are different. I need someone to give me the height of the boards including yellow portion has the sticker will contain both white and yellow portions. I also need the entire length all around the rink and then I need the distance between venter ice and the start of the blue line along with their widths (red and blue lines). I can't start until I have concrete information.

    Promoted items from the Pinside Marketplace
    From: $ 5,799.95
    Pinball Machine
    Pinball Pro
    $ 89.00
    Boards
    Pappy's Pinball Palace
    $ 18.99
    Eproms
    Matt's Basement Arcade
    $ 86.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 12.50
    $ 59.99
    Hardware
    Chroma Pinball
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 96.77
    Playfield - Toys/Add-ons
    Pinball-Mods.com
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    € 4.95
    Playfield - Toys/Add-ons
    Multigame
    $ 149.00
    Flipper Parts
    Mircoplayfields
    $ 76.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 27.99
    Eproms
    Matt's Basement Arcade
    $ 175.00
    Lighting - Interactive
    Professor Pinball
    $ 49.95
    Playfield - Toys/Add-ons
    pinballmod
    From: $ 169.95
    From: $ 11.95
    Playfield - Toys/Add-ons
    ULEKstore
    € 4.20
    Flipper Parts
    Buthamburg
    From: $ 6,499.00
    Pinball Machine
    Flip N Out Pinball
    $ 22.00
    Cabinet - Sound/Speakers
    ModFather Pinball Mods
    $ 65.00
    Cabinet - (Alt) Translites
    Pinball Haus

    You're currently viewing posts by Pinsider flashinstinct.
    Click here to go back to viewing the entire thread.

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside