CV Fuse 102 blowing each time I connect the back box Molex in picture. I did a playfield swap and cleaning, but everything was working fine prior.

What I’ve done:

1). Checked visual connections and I can’t identify a short.
2). Narrowed it down to when this molex is connected it’s the perpetrator

Thoughts?
01BB82E3-1551-457C-9F4B-33436C0C1170 (resized).jpegDE20143A-DF8E-40DE-B062-A324A3841D0E (resized).jpegF50E8A19-EF02-469E-9441-39AF26FC36C5 (resized).jpeg

Thanks. I found 2 wires that beeped in that molex when I had rep lead on each molex pin ad the other on the ground braid. One is solid black the other purple with a maroon line. What does that mean?

Thanks. And now I’m following that wire that beeped to find where it is touching metal somewhere it shouldn’t be, right?

The bad wire that beep is violet red. Back box kick solenoid that fires the balls. What should I be looking for ?

6FBE62C5-F057-4F58-915F-919D0DA8704E (resized).jpeg

Thanks. Does it matter that the beep on the multimeter happens when I touch the pin side that goes back to the driver boards?

Thank again everyone. Solved. It was the coil. Really appreciate how this community comes together to help each other out. Maybe pinball is the answer to our country’s many divides.

F3C3177A-6D0D-4058-A4EC-67F4D17E9B75 (resized).jpeg