Great work mate

you took the signage to a new level - looks awesome...

also for those interested I am doing one last run of Snackbar Mod's in which you can use this fantastic addition

https://pinside.com/pinball/forum/topic/swinks-cftbl-snackbar-mod-v5-last-ever-run

heck, I sold my creech recently but keeping the very very last production mod for my display cabinet which will have this mod in it - it looks very cool

I am thinking off for a little bit 5-10 seconds
- then flickering / blink randomly (neon warming up) over 5-10 seconds
- and then go solid but dull and slowly get bright from a soft glow over 20-30 seconds,
- then letters pulse through a few times over 10-15 seconds
- then fade to off over 20-25 seconds
- then 5-10 seconds break
and go through the sequence again, with each sequence being 60 - 90 seconds and gives a variety of effects and simulate a night at the drive-in.

no only the Snackbar v5 mod list is closed.

Snackbar Mod v3, v4 and v5 - all came with the sign on top
Snackbar Mod v1 and v2 - I designed a retro kit for those people to add the sign to these older Snackbars - see manual
https://swinks.com.au/manuals

CFTBL Snackbar Mod Signage Upgrade for v1 & v2 mods - rev2 (pdf)

not going to get my mod calling me "stinks"

that aside there are a few people upgrading their snackbar mods so post in the v5 snackbar thread and you might be able to line up a mod

it's alright, I was joking

great work mate and agree on making it mishap proof as well as giving options for people to connect up and turn on permanently or when all 4 targets are hit.

all good, made me laugh

nice work on the appropriate Knight Rider mode

hey @stumblor, I am soon sending a few Snackbar v5's to UK do you need any comet matrix adaptors as can ship a batch with there mod to you to help out.

a few people have reached out about upgrades, I do have some parts on Shapeways minus the tops as I only open those on request briefly as 2 people recently bought everything to build a snackbar themselves and one got upset when they discovered they need a stainless steel plate and I have no more. But these are still available via shapeways on request.

But if people have a v1 & v2 and want to add stumblor 's awesome lighting kit they can add just the signage as well which is an affordable kit. The housing is the part of difference between the v1 and v2 sign upgrade.

parts for the v1.5 signage kit for the Snackbar v1 can be found here (though you still can't use stumblor 's neon lighting kit)
https://www.shapeways.com/marketplace?q=swinkssnackbarv1.5&sort=newest

parts for the v2.5 signage kit for the Snackbar v2 can be found here which you can still take advantage of stumblor 's sign and neon lighting kit
https://www.shapeways.com/marketplace?q=swinkssnackbarv2.5&sort=newest

manual for the signage is here
https://swinks.com.au/manuals

just reach out if you have any questions

CFTBL Snack Bar Mod Signage Upgrade for v1 & v.pdf

true but isn't the same without the snackbar mod

congrats stumblor you made it to the TWIP list for best mod

here is a video posted today by Pinball Supernova of both new mods installed

Swinks Snackbar Mods are still available (either stock or a short waitlist) as well - just send me a message.

293601667_2038877029648203_8798834624691265091_n (resized).jpg