Hey folks! I got my chase echo board and just got er installed. I have to stay thank you for making it mount right up to the old holes, and the manufacturing on these boards is amazing!!. I am having some issues, and wondering if anyone else may be experiencing any issues? My bowl is not receiving any effect, and the overall chase lights on the main ramp are behaving odd... some lights are always on some always off, and some are in a ghosted state. I am wondering if its the leds I am using . Love any help thanks all!

stumblor such great product support. Thank you!

Hey folks my Chase board is working!!! For anyone else that may run into a similar issue here is what happened and how I solved it.

--- I do not have GI OCD ---

Problem:
some lights working, some lights partially working, some stuck either on or off. For me the bowl lights where basically stuck on.

Solution:
Every LED has to be in the right orientation ( different than the orientation the stock board likes ). So I removed the whole led strand from the upper ramp, turned the game on, and put it in ramp cycle mode. Then one by one flipped the LED's. NOTE: occasiannaly the board would stop working when I was doing this process LED's D1 and D2 would go out. All I did was power cycle the chase board and continue.

Finally, once all the LEDs are oriented correctly it was good to go!

Finally played my first full game on my restored creature, this mod is the crown jewel. One of the best mods out there. I can not imagine having a creature without it! Amazing work!!