Hello all:

I was going through my boards to clean them last night and as I was disconnecting the upper left board, I noticed a connector with 3 wires(2 purple with yellow stripes and a thin purple and black) that was unplugged. I also had 2 wires that were connected together with red electrical tape (a bown wire with light blue stripes and a brown wire with black stripes). Anybody have any ideas about how or why this was done? And where the connector needs to go?

IMG_1121.jpg IMG_1120.jpg

Ok, gotcha. Sure enough, no knocker. I see the 3 holes and the plate at the top where the knocker would strike. I'm guessing the knocker assembly is readily available from most vendors. Thanks for your help!

I found a new assembly from pinball life. It appears to only need the plug in connector in my machine. So do the other 2 wires connect to the assembly?