You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Quoted from arolden:What are the voltages on the power driver board test points? Are they all in spec?
This is always a great place to start!
You have lost your +18V (TP8) Since the regulated +12V (TP3) is created from the +18V, fixing the 18V (Controlled Lamps) should also fix the +12V regulared (Switch Matrix). Your +12V Unregulated is also very low at TP1.
Check F114
If you are positive F114 is fine, disconnect J101 and test BR1 using the procedure provided by zaza at the link below:
https://pinside.com/pinball/forum/topic/sttng-post-playfield-swap-issues#post-2475440
Best part about checking it this way is you don't have to remove the Power Driver Board from the game
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/sttng-slam-tilt-stuck-closed?tu=Pin_Guy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
