Picked up my first Street Fighter2 last night. It pretty good shape except missing the main System 3 pcb (MA-1934). Anyone know where I can find one.
Thanks
You're currently viewing posts by Pinsider jjoravec.
Click here to go back to viewing the entire thread.
I just picked up a project street fighter 2. It was missing the flipper motor on the bottom of the playfield. I got a replacement motor. Can someone take some close up pictures of how it mounts and how it is wired. I see 4 cut wires hanging down and I assume they go to the motor but not sure were the wires go.
Thanks
Quoted from latenite04:Here are pics of the Chun Li motor if that's what you were looking for. It's mounted to the playfield with a 3 screw L bracket on one side. It looks like it only has two wires, grey/yellow and grey/red. If you post a picture of the cut wires someone might be able to recognize what they go to.
Thanks, Anyone know where to get the L brackets that are used to mount the motor?
Quoted from latenite04:Here are pics of the Chun Li motor if that's what you were looking for. It's mounted to the playfield with a 3 screw L bracket on one side. It looks like it only has two wires, grey/yellow and grey/red. If you post a picture of the cut wires someone might be able to recognize what they go to.
Here is a picture of the cut wires and the connector that I am not sure where they go.
You're currently viewing posts by Pinsider jjoravec.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/street-fighter-club-all-welcomeready-set-shoot?tu=jjoravec and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.