Need a little help here. Downloaded and installed the new 0.86 code and now the demogorgon modes start without hitting the drops. When a ball goes in the pops, hits a switch or sometimes just when I flip it cycles through "will look out run" and begins the next mode/multiball without hitting any of the drop targets. I've tried the LE and premium files, but they do the same thing. Thoughts? The download may be coincidental and this could be switch related or due to a short perhaps. Anyone else had a similar issue?

Thanks. Yeah I downloaded the correct code. I agree that it sounds like a switch issue but was just weird that it happened to pop up immediately after the code update.

I’ll see what I can figure out and report back.

K. It appears switch 74, Center Ln Opto was activated. Unplugged connector and problem solved. Wiggled opto and wires, plugged back in and now it works. Maybe the opto was just barely out of adjustment for the hole.

update. problem persists after multiple adjustments to opto 74 (emitter side). going to replace and hopefully that will solve the issue.

on a different note, stern support has been great.