Hello Everyone. New to the Stranger Things club and absolutely loving this game. One of the first things I did was order the UV light kit. I ended up making an install tutorial just in case anyone is thinking about installing one. I hope this helps.

I was having issues with the left orbit ball guide feeding to the sling and sling post so I decided to make a tutorial on my process to fix it. I have played about 20 games since the fix and have not had any issues with it since. My game is set at 6.7 degrees and .1 degree low on the left side. I hope this video helps anyone having issues with the ball guide.

I made the mistake of selling this game last year and really regretted it. I was able to pick up a NIB from the recent December run and decided to go all out this time. I created three install tutorials and figured I would share them with the group in case anyone is considering installing a lighted shooter rod, topper, or side armor. Stay safe and play more pinball!

After much design work and testing, I am excited to announce my latest mod for Stranger Things Pro, Premium, and LE. I designed and built a custom vintage camera (10 parts) and a mounting baseplate that attaches to the ramp along with vertical fins to keep the ball from getting stuck behind the camera. This mod replaces the flasher dome to the left of the Demogorgan ramp and repositions the existing LED board so it can interact with the camera. Installation take less than 15 mins and I created a YouTube install tutorial to show the process. There is also a short demo of the camera in action. I have 40 camera mods built and ready to ship as of this post. Stay safe and play more pinball!

This mod can be found in my Pinside shop:

https://pinside.com/pinball/market/shops/1368-hurryuppinball

The install tutorial can be found here:

E9DCE66F-269C-46FD-8695-86332ECC9382 (resized).jpeg

717466CB-4DFF-4D83-B982-4F04D08C070D (resized).jpeg

15CBAFAC-1CE2-41C6-9915-A193D893C6E2 (resized).jpeg

279CFD37-01F2-46E9-A3C0-398A1958D185 (resized).jpeg

63A8CE3C-62C5-48B8-8C75-E3D139304F10 (resized).jpeg

970A40A3-4F3C-4C7A-A03A-A7EE820FAA31 (resized).jpeg

D423C2EA-DE41-4BF9-B372-8DE4636934F0 (resized).jpeg

A776FD64-A337-4F42-AB3F-28D0DBB12B53 (resized).jpeg

Johnathan inadvertently catchs the Demogorgan on film right before he snatches Barb, while looking for Will and "spying" on Nancy at Steve's house. It pops up a good bit throughout the seasons. I tried as hard as I could on stream last night but just couldn't get the second isolation MB started. I did play one game solely focused on the Demogorgan wizard mode and was kinda shocked to see after playing it, I only had 150M points. Goes to show how much playing the modes / collecting drawings helps with scoring.

STh Mod Stream (resized).png

I just wrapped up another batch of Stranger Things Camera mods if anyone is looking to purchase one. The installation takes about 15 mins and a video detailing the installation process can be found below. This mod is a replica of Johnathan’s camera as seen throughout several seasons of Stranger Things and is interactive with the game (ripping the spinner really makes it come to life). This mod is an original design and requires over 8 hours of print time with 10 separate pieces. I like to keep inventory on hand and I ship almost everything within 24 hours of an order being placed.

This camera is available in my Pinside shop located here: https://pinside.com/pinball/market/shops/1368-hurryuppinball

For a detailed installation video, click here:

ED5725CE-8179-4C37-9CD4-1A58D84D96EA (resized).jpeg

C53D93A1-0E95-435A-8F0B-0C5ED2794A38 (resized).jpeg

077E435D-AD85-4EBE-A441-1E8938F8E818 (resized).jpeg

5B43CD22-0B73-487C-AD9D-C8FFD3D1E08F (resized).jpeg

A9D2B1DE-F637-4E9D-9BC6-9E42FEF00A42 (resized).jpeg

In anticipation of the season 4 of Stranger Things, I will be selling my Stranger Things camera mod for the Pro, Prem, and LE for $50 for the next 11 days. This represents a $25 discount off of the normal price of $75. I have 35 cameras boxed up and ready to go. This is a fully custom design based off of Jonathan's camera as seen throughout the first 3 seasons of Stranger Things. For more information about this mod, be sure to check out the installation video below. A link to my shop can be found here.

https://pinside.com/pinball/market/shops/1368-hurryuppinball

I will be streaming stranger things on 5/15/22 at 8pm est if you want to see the mod in action:

twitch.tv/hurryuppinball

5a4cd8a6266b21cf2826129eadb7151c49b80a2c (resized).jpgb28c87cc684dbe63318643a3f8a5e25805a14787 (resized).jpg

If you are looking for a Stranger Things camera mod, I decided to drop the price from $50 down to $35 for my remaining inventory of cameras. I have about 25 camera mods boxed up and ready to ship at this time. If you are interested in purchasing one, below is a link to my Pinside shop where you can find this and several other mods. This mod is interactive with the game and flashes during certain events, modes, etc. At the 0:40 time stamp in the install video, you can see this camera in action. Please let me know if you have any questions.

Pinside shop: https://pinside.com/pinball/market/shops/1368-hurryuppinball/06708-stranger-things-interactive-camera-mod-pro-prem-le

Install Video:

DSC_0900 (resized).JPG

DSC_0901 (resized).JPG

DSC_0885 (resized).JPG

DSC_0856 (resized).JPG

With the release of additional STh Pros and Prems just announced, I just thought I would drop a link to my camera mod in case anyone is looking for one. I am no longer making this mod but have about 15-20 remaining from my original run of 50. They are currently $35 + $5 shipping in the US. I have included the install video I created for this mod which also includes a quick demo during gameplay. I’m glad Stern is re-running this game and that more people will get to experience it.

https://pinside.com/pinball/market/shops/1368-hurryuppinball/06708-stranger-things-interactive-camera-mod-pro-prem-le