After replacing every part in the upper-flipper mechanism, I am still unable to make the ramp.
I am wondering if I wired the lower right flipper double stack switches properly.
Can someone please post an up-close photo of the proper lower right flipper wiring?
The ones on ipdb are a bit too blurry.
Since I have replaced every part with no success, I am thinking the problem might be wiring, and that the high power is not engaging to the upper flipper. Instead, the low power hold is engaging immediately instead of at the end of stroke.
When I bought the game, there was no lower right flipper coil.
I tried to copy the wiring based on the ipdb pic.
The lower right flipper has tons of power, but the upper is very weak.
Here is a picture of the wiring:
Thanks in advance !