Addams Family, The
Bally, 1992
Batman
Data East, 1991
Batman Forever
Sega, 1995
Baywatch
Sega, 1995
Checkpoint
Data East, 1991
Hook
Data East, 1992
Lethal Weapon 3
Data East, 1992
Lord of the Rings
Stern, 2003You're currently viewing posts by Pinsider steve45.
Click here to go back to viewing the entire thread.
Power consumption depends on the duty cycle and even if its theoretically possible to may drive to panels with 3 or more amps each, this will never happen with pin2dmd in pinballs. These panels are so bright if you increase the duty cycle, you can't play anymore.
Quoted from tjc02002:Will the firmware be different? If so will you continue to make firmware updates for the old version as well? Please say yes.
Oh also, this looks great. Thank you for continuing the support for this and continuing to make improvements.
Thank you.
To some extent yes, but there is a reason why we switched to a more powerful controller. It has more memory and even more cpu power. There are some new features currently developed that simply requiring the better hardware. e.g. running the big displays with 192x64 with full colorization looks like impossible to create on the old hardware.
Quoted from galaxian:Feature ideas for pin2dmd
Shaker motor output where you can use frame Id to trigger shaker.
Output from the pin2dmd to the GI so that the pin2dmd can control rgb leds in the GI circuit.
This should be doable with pin2dmd event trigger output. You would need a secondard device (or controller board) that receives the serial commands and then controls a shaker or control rgb leds in GI.
Shaker control I've done based on RasPiSound already in my HS2 see here https://pinside.com/pinball/forum/topic/rebuilding-sound-for-de-jurassic-park-using-a-pi/page/3#post-4562327
Br Steve
Quoted from lucky1:It is 60 Euro for each PCB with a minimum order quantatity of 10 pcbs at pcbway.com.
It has the same features as the Nucleo shield solution (except Wifi) und supports 5V and 12V input power.Since go-dmd is not supported on the Nucleo shield, it is also not supported on the EVO board.
Even if it would be minor effort to port the latest firmware to the EVO board, it is still missing headers for (more or less) required peripherals like dht sensor, pir sensor, ir sensor also with neither wifi nor rtc even correct time will be a problem. So no goDMD support with this board.
Br Steve
Quoted from lucky1:go-dmd is completely the project of Steve45 and although some things in common it has nothing to do with pin2dmd. I only tested it once and never created any animations for it myself So I´m not the best person to ask questions about it. Steve is currently pretty busy with his new project https://pinside.com/pinball/forum/topic/rebuilding-sound-for-de-jurassic-park-using-a-pi/
So maybe it helps to hitchhike his thread to get his attention instead of a pin2dmd thread or you just ask here
https://www.flippermarkt.de/community/forum/threads/dmd-uhr-made-in-germany-bestell-und-infothread.153282/
I got his attention already, but I can't do everything at the same time, so please be patient. Nice clock picture by the way ...
Br Steve
You're currently viewing posts by Pinsider steve45.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stolen-pin2dmd-color-rgb-controller-from-pinballspcom?tu=steve45 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Milwaukee, WI