Creature from the Black Lagoon
Bally, 1992Hi
My J116-117-118-119 have all there wires.
But I found another set of black/Gry-yel wires cuted near these connectors 4 connectors...
Any idea where they might go?
The probleme I have with this game is the right and lower right popper (switch 34-37) never stop popping
Attached is what I draw to be sure where all wires should go
where should I plug these 2 wires left?
image-92.jpgimage.jpg
Is the switch gap set up properly so that it is not touching on both pops? Have you tried isolating the switch from the equation? You can yank the switch input connector from the MPU and see if it still mchine gun fires the pops. Usually this issue is related to a faulty switch driver issue, the game sees those switches as being closed and repeatedly fires those transistors.
Check the switch diodes in the switch column, I'd imagine both pops are probably in the same column. If so, the issue is definitely switch-related. You may just have to swap out a switch transistor.
I'm not sure about those other wires, but if all your connectors have wires on them and the schematics mention nothing about them, I'd just tape them off and ignore them.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/still-working-on-cftbl and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
North Hatley, QC
Naples, FL