Quoted from chuckwurt:Pinball life has brackets that eliminate the spot target shifting.
I'm using the Mezel Mods target splint on my Deadpool SNNKKKT target, but it still moves over...
You're currently viewing posts by Pinsider awesome1.
Click here to go back to viewing the entire thread.
Quoted from chuckwurt:Pinball life has brackets that eliminate the spot target shifting.
I'm using the Mezel Mods target splint on my Deadpool SNNKKKT target, but it still moves over...
Quoted from PinMonk:The error is there for a reason. So, not normal, even the handful of people you know with one has it. I'd check the 48v output from the power supply and see if Stern got a batch of them with the 48v slightly low (which would draw the error when everything powers on at once at boot). If the 48v is dead on 48v or a hair below, you can bump it a half a volt with the pot.
Could this be related to the coin door interlock switch? "48V disabled,etc..." displays when I open the coin door on my Deadpool with 1.03 code. Maybe the ST code isn't fully flushed out for this yet?
Quoted from PinMonk:Black Hole and Haunted House have great lower playfields.
For sure! I also enjoyed Elektra and even though most may not agree... bashing the car on SF2!
You're currently viewing posts by Pinsider awesome1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-stranger-things?tu=awesome1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.