May the Fourth be with you!!! (Ok I'm a few minutes early on the east coast.) I wanted to share some new mods I'm making for Star Wars.
First are the 3D Coin Reject Buttons featuing a representation of the Millennium Falcon:
These coin buttons are 3D printed using translucent filament (your choice of color -- red, orange, yellow, green, blue, purple, clear/white), with a mid-print filament change to special Marble filament -- so the Millennium Falcons are permanently fused to the buttons. I chose Marble for its off-white color of the MF, and the dark flecks give the appearance of the dirt/grit she typically carries.
Next is the 3D Start Button! Another dual-filament print puts a slightly compressed representation of the Death Star atop a translucent green base. The Death Star has cutouts that read 'START' in a Star Wars-esque font, and also cutouts for the superlaser!
StarWarsStart_RCP (resized).jpg
The coin buttons and the start button are very easy to install (I have DIY videos to walk you through). They're available here in my shop on Pinside or through my website. Feel free to contact me if you have any questions!
Pinside - coin buttons: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/05033-3d-coin-reject-buttons-star-wars-stern
Pinside - start button: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/05036-3d-start-button-star-wars
Website: https://rocketcitypinball.com