Star Wars (LE)
Stern, 2017
Star Wars (Premium)
Stern, 2017
Star Wars (Pro)
Stern, 2017
Star Wars Comic Art (Premium)
Stern, 2019
Star Wars Comic Art (Pro)
Stern, 2019You're currently viewing posts by Pinsider mistwalker.
Click here to go back to viewing the entire thread.
Quoted from twenty84:Thanks, we don't have them on the site yet, but are working on it. The limiting factor now is figuring out shipping costs. Right now only a very limited number of them, but can make more if there is interest. Will likely be $150 per set.
Consider me interested! Those look awesome!
Have been enjoying this game for a little over a month now, here's my take. The game is fast, and brutal, but so much FUN! Good shots are well rewarded, sloppy shots are swiftly punished. Destroyed the Death Star once (Battle over Endor) Awesome!
Finally received all the accessories I ordered and set everything up about a week ago. BIG shout out to Yelobird for pointing out the obvious. Ordered the LE side armor and lockdown bar from my distributor, and now I have the look and feel of the LE (everything I felt I was missing with a premium) without the LE price tag!
Also picked up the EL panels for the side armor from Pingraffix and last but not least the awesome candy blades from twenty84 and Chrome Candy.
Everything kinda came together magically, and my SW underwent quite the transformation!
One more game...
20180328_131757 (resized).jpg
20180328_135548 (resized).jpg
20180328_112213 (resized).jpg
Quoted from imagamejunky:Please tell me where you got the LE side armor. I want them!
No magic here, just called my distributor with item numbers from the owners manual, and they ordered them for me directly from Stern.
Quoted from pauloz:No but I had problems with the ball save gate staying open after it used and should close. No amount of adjusting fixed the problem so I removed the gate and the game gives a virtual ball save. Problem solved and I guess that would solve your problem as well.
Anyone else having this problem with the ball save gate? Mine started acting up intermittently, but now stays stuck open everytime, and wont jiggle closed eventually like it did at first. Anyone have a different fix? I'd hate to have to remove the gate entirely as a fix, but it is unplayable as is.
Quoted from pudealee:monte_ My Escape arm was doing something similar a while back, and all I had to do was tighten the hex screw at the pivot point on the playfield. Good luck.
Mine has been doing the same. Just tightening that once screw from the top I assume fixed it? I asked the question awhile back and the only solution anyone offered was to remove the gate completely. I am going to try this simple fix tonight! I have honestly been too busy with everything else to even bother removing the glass yet and trying anything. Thank you!
Quoted from monte_:Even though the screw didnt seem loose, tightening it very tight solved the problem. Thanks.
Thanks for confirming the fix! I will be doing this tonight when I get home!
Quoted from pudealee:monte_ My Escape arm was doing something similar a while back, and all I had to do was tighten the hex screw at the pivot point on the playfield. Good luck.
Well I tried it and this fix did not work for me. Maybe someone else will chime in with an alternate fix. Thanks anyways!
Quoted from Rob_G:I used a pair of pliers on the escape gate coil actuator plate and 'tweaked it a tiny bit'. That was after I tried adjusting everything else with no success. It's been good ever since.
Rob
Thank you for your feedback! I will try this tonight!
Quoted from Nickbtx:My escape arm would hang open occasionally. Beneath the playfield there is a collar on the bottom of the shaft attached to the arm. The collar was too far in on the shaft and was binding on the plastic bushing #2. The fix for me was to loosen screw #9 and move the collar #5 out about 0.020" on the shaft. There was green Locktight on the screw and collar and I had to remove the assembly to make the adjustment, which was pretty simple to remove. To see if this is your problem, check to see if you have any vertical movement on the diverter arm/shaft. It doesn't need to be much, maybe the thickness of a piece of paper, but there should be perceptible play. YMMV
Thank you for this! I will be digging into it tonight to see what it looks like!
Quoted from Ccondo:I just encountered a new one for me... my outlane gate on my premium will open but not close. I inspected it and everything looks intact and set screws are tight... next suggestion?
Post #4838 of this thread outlines the fix for this. I am having the same problem, but have not yet had a chance to dig in this far. Let us know on here what works for you! Good luck!
You're currently viewing posts by Pinsider mistwalker.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-star-wars-clubmay-the-force-be-with-you?tu=mistwalker and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Milford, CT