I'm in for a pro since 4 days. It's coming in a week or two.
You're currently viewing posts by Pinsider bramvk.
Click here to go back to viewing the entire thread.
Quoted from NoQuarters:Anybody have an answer - Home play Setting vs Factory setting ? Is one easier than the other ??
Been searching for this....can't find anything on Home play settings. Would like to know too.
Quoted from DCFAN:Level the game?
Thanks, but the game is level and at a pitch of 6.6 or 6.7 degrees. Sort of standraad settings.
Quoted from DCFAN:The one I played last night did not SDTM drain from the inner loop at all. Could one of the guides be installed wrong somehow?
Is yours draining when exiting the left side of the inner loop or when exiting on the right?
Draining when exiting the inner loop on the right.
I noticed higher ball speeds increases the draining.
Very high speed balls leads to 100% drains down the middle.
Quoted from NoQuarters:Two questions:
1. In regards to adjusting the outlane posts. How do you move the post on the left outlane as that post is under the left plastic ramp ?
It can be done without moving the ramp. Put a screwdriver in it from the side(45 degree angle) and hold it there, just to keep it from rotating. Rotate the wrench underneath the playfield. I did it this way.
Quoted from Iceman:Has anyone have a reset with the latest code? Today it happened to me. I had escape from death star I know I hit the stand up targets under the mini screen. Next thing all the lights went on and the screen froze. But the weird thing my flippers still worked for 5 seconds. Then the machine shut down and resets. Never had that happen before.
Had the same thing. And the Hoth "lock" is messed up again. Does not capture the ball when Hoth is lit. Posts go down, both sides. (entrance and exit)....I put back previous code to check...no problem there, working ok, put in 1.04.o0 gain and sucks.......so it's the code.
You're currently viewing posts by Pinsider bramvk.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-star-wars-clubmay-the-force-be-with-you?tu=bramvk and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.