Quoted from Hammer3246:Is yours the official Stern Falcon or a 3rd party? Just asking cuz I'm curious about wiring options.
It's a 3rd Party - Little Shop fo Games. Has a two conductor wire and molex connector that I plugged into the Milenium Falcon flasher output. LED 5/6 on an adjacent board I believe. I'd have to lift up the PF and look again to confirm that plug but it took less than 10 minutes to install. I removed the two nuts / washers from the plastic ramp where the Stern Falcon mounts to. The House of Games version does not come with a mount / standoff but it wasn't an issue. Used both nuts and washers to create my own standoff by threading thee first lock nut and then washer on the bolt post, put that through the back hole of the plastic for mounting and the put the other washer and lock nut on the other side. I am likely going to put a wider washer on both top and bottom so as to keep the MF from putting excessive pressure on such a small point of contact - spread out the pressure if the falcon takes a hard hit from an airball which mine has twice. Even though it mounts flat and not leaning to the right like the Stern version, it still looks great!
Unfortunately looks like it's currently sold out.