Spider-Man
Stern, 2007I recently got my Spiderman trim powder coated, and as part of the process I was sent a new Stern lockdown bar without tournament button. Though it fits, the bar does not seem to fully latch in. Wondering if there's some nuance I'm missing, for the bar pulls up on the right side if force is applied from the underside (does not lift from the left)
Quoted from LTG:Not adjustable.
That blue leg sticking down, probably have to file the notch bigger so it can lock. Or try loosening the receiver and pull the receiver up and retighten. That might work too.
LTG : )
Thanks Lloyd.. How would I pull the receiver up, it appears to be affixed by a few bolts that go through the front of the cabinet and a large one in the center, almost as though the position is fixed and stationary, without flex?
Quoted from cheshirefilms:How would I pull the receiver up, it appears to be affixed by a few bolts that go through the front of the cabinet and a large one in the center, almost as though the position is fixed and stationary, without flex?
Loosen bolts and see if there is any wiggle room to move it up.
LTG : )
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-spiderman-ld-bar-fit-issue-replacement-wo-tournament-button and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Plano, TX