Hopkins, MN
Unplug opto sets one at a time until you find it.
LTG : )
(Topic ID: 187255)
You're currently viewing posts by Pinsider LTG.
Click here to go back to viewing the entire thread.
#29 - DON'T LUBRICATE. Take apart, clean, check for worn coil sleeve, when you reassemble be sure the end of the spring doesn't get between plunger and inside of coil sleeve.
Optos - when I've run into this and narrowed it to one board the offending optos plugs onto. I remove the board, remove the old solder to the pins the optos plug onto and the pins the big connector plugs onto and flowed on new solder.
Then put back in game, plug opto connector back on and put a dab of hot glue to help hold the connector on.
LTG : )
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider LTG.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
