You're currently viewing posts by Pinsider tsskinne.
Click here to go back to viewing the entire thread.
So I have tried new SDB and an Altek and same problem as my original boards. I have no 7th Flash. I have 43 volts at rectifier (also new) and solenoid driver board, but not at MPU. It’s like 67 volts or so their. I had repinned all connectors going to the MPU and I’m guessing I screwed something up. Any help would be greatly appreciated.
Quoted from Thrillhouse:Is your sound board connected properly? Most classic Sterns won't boot without it hooked up.
I believe so. It makes a boot up sound and the beeps that go with the flashes as well.
Quoted from Quench:Post very clear pictures showing the wire colors of the re-terminated connectors at J3 of the rectifier board and J4 connector at the MPU board.
I’ll have to get those pictures tomorrow I removed the game from location and it’s still in back of my car.
Thank you both for the help.
You're currently viewing posts by Pinsider tsskinne.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-mpu-200-split-second-help?tu=tsskinne and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
