Stuck a 32gb micro sd card in my game, at boot up it was detected and is being formatted. Two hours later, still formatting. Jeez how long does this take?!
You're currently viewing posts by Pinsider andre060.
Click here to go back to viewing the entire thread.
Stuck a 32gb micro sd card in my game, at boot up it was detected and is being formatted. Two hours later, still formatting. Jeez how long does this take?!
Thanks for the feedback!! Tried a second one of the same brand of the first one that didn't work - Lexar - and it didn't work either! Then I switched to a Sandisk and that worked fine. The lexar ones work in every other device I've tried though, seems like the Spike cpu is pretty picky?
Quoted from flynnibus:The only thing I think would be is you had some MBR/EFI thing that was incompatible. I would just take a working card and looking at it's partition table and boot record for prosperity to know. I don't have any IC games at home right now to check...
I’ve had this exact problem and checked the boot record of the card using disk/partition management software - it’s not that, the non-working card was set to MBR exactly the same as other working cards. (That is definitely a good thing to check if you’re using a thumb drive for updates though - GPT will not work!)
Anyway back to the cards that won’t format, for some reason, the Spike2 CPU boards just don’t seem compatible with certain brands of cards. My advice is to try a different brand - I’ve not yet encountered a Sandisk card that didn’t work for Insider Connected.
You're currently viewing posts by Pinsider andre060.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-insider-connected?tu=andre060 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.