Godzilla (Limited Edition)
Stern, 2021
Godzilla (Premium)
Stern, 2021
Godzilla (Pro)
Stern, 2021
James Bond 007 (60th LE)
Stern, 2023
James Bond 007 (LE)
Stern, 2022
James Bond 007 (Premium)
Stern, 2022
James Bond 007 (Pro)
Stern, 2022
Rush (LE)
Stern, 2022You're currently viewing posts by Pinsider Xdetroit.
Click here to go back to viewing the entire thread.
I don’t think you will have to display the QR code. On location you will want to have it on the apron to entice a consumer to play the game. For home, the code could be scanned from anywhere I’d guess. The coded should be able to be scanned, shrunk, and printed on a small sticker that you can place anywhere. With all that being said, I hope stern puts the QR code on the screen so the code can be avoided being put on the game somewhere.
You’re right! I just noticed there is a scanner component.
Quoted from fooflighter:They are building it directly into the Apron with a scanner
//<![CDATA[
window.__mirage2 = {petok:"b170436bf1e902cfcec4854e9a79325cc3831be4-1629989447-1800"};
//]]>I can see custom, non QR Apron sales increasing...but you just know they will modify the attachment points to force new playfields to new aprons
Quoted from EricHadley:Is the game code up to date?
No. I just checked and there is an update. I’m just surprised it shipped with the kit installed and it didn’t have the software loaded to support it. I’ll try the update. Thank you
Update: Updated to 1.05 and that fixed it. I looked at the build date and it was December 20th I think that was before the IC release.
Thanks for the info! I didn’t realize the TJ45 part of the scanner was a stern part
Quoted from flynnibus:The QR reader alone isn't the problem - this is a OTS component and linked in this very thread.
The problem is the scanner is a combination of a QR Reader+ Stern Node board... which is not OTS.
You're currently viewing posts by Pinsider Xdetroit.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-insider-connected?tu=Xdetroit and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Glen Ellyn, IL