Installed the coin door mount for Pinball Life Audio version from @gotfrogs. Was simple install. Ethernet cable included was very long which made it easy to run the cable from the apron, under the playfield and zip tie to other cables under the playfield, then alongside the cabinet through the existing cabinet wire holders and to the coin door. Plenty of slack and able to raise and lower the playfield without any interference.
I had 1 minor question on how to remove the audio jack and volume knob from the coindoor plate, so I messaged gotfrogs who confirmed the proper procedure for removing the items. My only comment might be to update the PDF instructions to include which tools to use to remove the audio controls. I was pretty sure what I needed to do but wanted to be sure so I didn't break the Audio Components/Connectors.
Very satisfied with this install and much easier than having to remove the apron on my JP Premium and get to keep the artwork as well!
Thanks Gotfrogs
ICAudio (resized).jpgICCabling (resized).jpg
Evansville, IN
