Does anyone know if this game has CO OP play?
You're currently viewing posts by Pinsider thefuge.
Click here to go back to viewing the entire thread.
Working in my Godzilla Premium! really loving it
struggling with 2 things:
1.The Scoop shot (very hard to hit) anyone with tips hitting the scoop consistently?
2.The Godzilla figure. Holy shit it's bad. In comparison with the mechagodzilla it just looks off in the machine. What is the best replacement?
honestly dont get them putting that in the machine. Almost as bad as the mcdonalds joker figure in The Dark Knight.
Regards!
Quoted from Sorokyl:Mine is coming Wednesday, and i feel like I've become an expert in Godzilla action figures in the last 72 hours....
There are plenty of various cheap godzillas out there, but if your willing to spend about $60-70USD you can get a posable action figure from NECA. This is gonna let you pose the miniature best for where you put him in the pin. These are also the max size you can fit, which is just over 6 inches.
There are 4 eras of Godzilla so the first decision is which Godzilla you want. Probably the original 50s-70s Godzilla which had the movies that most of the pin is based on. There are two Neca Figures at least for this era. eBay is your best bet:
"Neca 1956 Movie Poster Godzilla" <- what I ordered
"Neca 1964 Godzilla vs Mothra" <- my 2nd choice
The 1956 is based on the 1956 Amercian version of the original 1954 Godzilla. They changed the costume after this first movie (Not to mention that Godzilla died, and the other movies have a second Godzilla), So there's some subtle differences between this and the 1964 figure.
But the most important difference between these two figures is the 1956 Movie Poster edition is brightly painted. I think this fits the pinball game better, as its very bright. But, it doesn't really match the Godzilla from this Era, who was very desaturated. If you happen to have miniature painting skills, perhaps you can paint whatever figure you get, but if not, keep that in mind.
sorry for the wall of text. I've just spent way too much time looking for a plastic godzilla toy and didn't want all my work to go to waste=)
haha thank you for your Godzilla Figure thesis
Ill look them up and see if i can get them in europe
regards
Quoted from Sorokyl:Mine is coming Wednesday, and i feel like I've become an expert in Godzilla action figures in the last 72 hours....
There are plenty of various cheap godzillas out there, but if your willing to spend about $60-70USD you can get a posable action figure from NECA. This is gonna let you pose the miniature best for where you put him in the pin. These are also the max size you can fit, which is just over 6 inches.
There are 4 eras of Godzilla so the first decision is which Godzilla you want. Probably the original 50s-70s Godzilla which had the movies that most of the pin is based on. There are two Neca Figures at least for this era. eBay is your best bet:
"Neca 1956 Movie Poster Godzilla" <- what I ordered
"Neca 1964 Godzilla vs Mothra" <- my 2nd choice
The 1956 is based on the 1956 Amercian version of the original 1954 Godzilla. They changed the costume after this first movie (Not to mention that Godzilla died, and the other movies have a second Godzilla), So there's some subtle differences between this and the 1964 figure.
But the most important difference between these two figures is the 1956 Movie Poster edition is brightly painted. I think this fits the pinball game better, as its very bright. But, it doesn't really match the Godzilla from this Era, who was very desaturated. If you happen to have miniature painting skills, perhaps you can paint whatever figure you get, but if not, keep that in mind.
sorry for the wall of text. I've just spent way too much time looking for a plastic godzilla toy and didn't want all my work to go to waste=)
Just got this for 48 euro shipped on ali:
https://nl.aliexpress.com/item/1005003682095349.html?spm=a2g0o.cart.0.0.11433c00OrICFe&mp=1&gatewayAdapt=glo2nld
thanks for the tip!
any suggestions on the scoop shot?
Quoted from chuckwurt:Shoot from a trap and memorize where on the flipper the ball is when you flip and make the scoop.
I tried this a lot but its not working.
maybe my flipper is a bit too high. Ill try to lower it tomorrow
Quoted from Thefuge:Is my playfield print bad or am i nitpicking?
[quoted image][quoted image][quoted image][quoted image][quoted image]
no one who can chime in on this one?
or can post a pic of their playfield?
Could people who can hit the scoop consistently please post a picture of how your flipper bats are aligned?
Thanks from a sucker who cant hit the scoop.
I aligned to the points like i do all my other machines, but I THINK it should be lower to hit the scoop.
So please guys (who can do scoop shots like a sniper) post dem bats!
You're currently viewing posts by Pinsider thefuge.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club?tu=thefuge and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.