You're currently viewing posts by Pinsider sethman.
Click here to go back to viewing the entire thread.
That silver you refer to is actually mirroring. That’s the light reflection on the awesome amount of mirroring they put on the backglass.
regarding my prior post about sound settings.
Disregard and leave alone as comes from factory.
Those levels were found to be optimal by design team.
Quoted from gambit3113:Monsterarts Godzilla vs Mechagodzilla II Poster Art (Noriyoshi) figure
Did you drill / screw into his feet like the stock one was attached? I have the movie poster Neca I need to install yet.
Alright here’s my go at adding in the Neca Godzilla king of the monsters movie poster figure. Will monitor and see if a dab of glue is needed on the heat beam inside his mouth or if it stays put. Used the 3M double sided tape. Pretty straightforward. Tail has a ton of articulation to make it fit.
Going to try some different color flasher bulbs like a blue or purple to set off the colors differently. Pretty happy with result.
116CF2F2-084B-4C70-A35D-F6BF9DF23BF6 (resized).jpeg08CAE022-E277-471E-8D6D-D4AD3A58F9AA (resized).jpeg0E60FDD9-32F4-4026-A918-88D21D619AAC (resized).jpeg7C049935-D53A-4B3B-BEDC-C3A0AA1812C1 (resized).jpegDD07573F-E9C7-4EBB-A3AF-6521B3D107C5 (resized).jpeg3CE7026D-064E-4F27-8F8C-2EC5EFA646DA (resized).jpegQuoted from chickenscratch:Another Q; why do I need to manually hold in interlock switch when in network menus? PItFA!!
You can pull the interlock switch out so you don’t have to hold it in.
Quoted from Vitty:Had my Godzilla mech quit spinning last night. Motor runs to spin it but no action. Hoping it’s just the hex screw came loose on the motor shaft. The unit does appears to have two gears though so hopefully it’s not a stripped gear. Will report back once i take the motor assembly off this evening.
I had this happen right after I got the pin. Motor would run but no movement. Was fortunate enough, all I did was disconnect the 2 cables related. Power for the motor and cable going to the small pcb. Power cycled a couple times and reconnected the plugs in between. Started working fine again on its own.
Worth giving a shot before tearing it all apart.
V1.05.0 - April 20th, 2023
==========================
- Planet X - added early unlock adjustment "PLANET X UNLOCK":
- NORMAL - Complete all Tier 2 Battles to unlock Planet X at the Select City Screen
- EARLY - (default) Complete all of the following to unlock Planet X early at the Select City Screen
- Play any Tank Attack Multiball
- Play any Bridge Attack Multiball
- Play any Tesla Strike
- Play any Kaiju Battle
- Leave Tokyo and light "Select City" again
- any Battles or Cities that are bypassed when selecting Planet X early are no longer available for the rest of the game
- added new display effect when Planet X is unlocked early
- Planet X Hurry Up minimum values changed from 55M-50M range to 225M-175M range
- Godzilla Powerup - when the "PLANET X UNLOCK" adjustment is set to "EARLY", completing at least the first Hurry Up in Planet X
will unlock a 2nd choice for Godzilla Powerup Level 8. The first choice is always lighting the mini-wizard
mode you didn't pick from Level 4. The second choice (if available) will be "Light King of the Monsters".
- any mini-wizard mode skipped by choosing "Light King of the Monsters" is no longer available for the rest of the game
- Earth Bonus - scoring update:
- old: 50% of the Carnage Bonus for all 4 cities
- new: 25% of the Carnage Bonus times the number of cities you visited
- resulting in 100% of the Carnage Bonus for each city if you visit all four cities now
- Oxygen Destroyer - added difficulty adjustment "OXYGEN DESTROYER":
- OFF - no Oxygen Destroyer lit
- EASY - any switch triggers Oxygen Destroyer when lit (building hit or building exit switches)
- HARD - (default) only a shot through the building triggers Oxygen Destroyer when lit (building hit switch followed by building exit switch)
- timer now pauses when the ball is held in the Scoop or Magna-Grab which helps during Tier 2 Battle's Fight or Flee
- Loops - scoring update:
- award increased from 350K to 500K
- award increment increased from 10K to 15K
- award max score increase from 1.5M to 2M
- Jet Fighter Attack - Final Hurry Up Jackpot increased from 3X to 5X
- Magna Grab - 5X scoring for Loops extended from 1.5 seconds after drop to 5 seconds after drop to sync with Imposter timer
- Heat Ray - no longer allowed to use the Heat Ray when the ball is held in the Scoop or Magna-Grab
- Kaiju Battle Modes - fixed a spelling mistake for "ANGUIRUS" in some modes
- Instant Info - fixed an occasional pluralization error in Powerlines Instant Info page
- Shield Motor - fixed technician alert message so it now shows the switch number as well as switch description
- Bonus - added rare bonus collect callout
- Attract Tutorial Videos - fixed a spelling mistake in "Godzilla Multiball"
- Adjustment Changes:
- removed "GAME MODE ON START" from being displayed in the system adjustments since this game uses "DEFAULT GAME MODE" in the game's adjustments
- added "PLANET X UNLOCK" - NORMAL / EARLY (default) - options described above
- changed to "OXYGEN DESTROYER ENABLED" to "OXYGEN DESTROYER" - OFF / EASY / HARD (default) - options described above
- System - Updated to V3.36.0 on OS: V2.7.0
- Updated to nodeboard firmware/protocol v1.5.0
- Update selectable upper bound for Grand Champion, and HSTD 1-4 Awards. GC may be set up
to 5, HSTD #1 to 4, HSTD #2 to 3, HSTD #3 to 2, and HSTD #4 to 1. The default value for these has
not changed, just the ability to select a higher value.
- Added game version number to lower left of attract mode Insider Connected screens.
- Updated Service Menu landing screen to graphics.
- Conagent 1.0.9
You're currently viewing posts by Pinsider sethman.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club?tu=sethman and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.