Super7 has an affordable Godzilla i case any are interested
https://super7.com/products/godzilla-reaction-figure-shogun-original
You're currently viewing posts by Pinsider cigarman79.
Click here to go back to viewing the entire thread.
Super7 has an affordable Godzilla i case any are interested
https://super7.com/products/godzilla-reaction-figure-shogun-original
Quoted from hanzie:I’m being told by my distributor September of next year for my premium I hope that changes or I can find one before then. Stern has a hit title on their hands they will be working on these for a while
My preorder was quoted at June ‘22 delivery
Quoted from hanzie:When did you put your order in??
Two weeks ago. Had to play test it before I pulled the plunger.
First pin.
So I’m on the list for the next run apparently.
Had Premium for a week now - and looking for some info on the collapsing bridge...
I never see the bridge actually collapse in game. Diagnostic check has it working, but not sure which feature or shots needed to activate the bridge collapse.
Looking for a knowledge dump on how/when this becomes part of my gameplay experience.
Also - is there a good guide out there explaining all the game modes, battles, etc.?
Printed and laminated some player cards for Stern Connect.
This was the kids, friends and fam can have quick access to logging in.
Made a magnetic holder to slap on the beer fridge.
89636550-2143-428E-B7BC-B9C90B1D5A92 (resized).jpeg9924A5A7-F9D4-4B62-95F7-9DE48DED3843 (resized).jpegE8EFBBA3-4043-4211-96CD-C7150BD4586F (resized).jpegQuoted from Pugster:Brilliant! Great idea I’m totally stealing it
Let me know if you want any photoshop/artwork files
Quoted from Only_Pinball:I would love the template!
I’ll post later tonight - kids baseball tonight.
You have Photoshop?
Otherwise let me know what you use.
Quoted from DaveH:This guy?
Yeah, all you need to do is hold up your phone with the browser open to Pinside and it reads peoples QR codes into the game. I was curious, and even the off angle ones just read right in.
Like I said, I won’t be doing it again. It was a dumb experiment.
lol - yep, "This guy"
I tried to search for DaveH here, obviously didn't get match... didn't see your post on prev page.
Sorry it's been a craptastic experience for you - and it's super weird it reads as other's accounts.
I really love this feature, and was really curious what happened.
For those interested in the template I used for printing Insider Cards, I added the Photoshop (PSD) file, as well as a blank JPG image.
For those without photoshop, just put the JPG into Word, or whatever, add your name, QR code, and avatar (or just cover it it up)
Files in my shared Pinball dropbox folder: https://www.dropbox.com/scl/fo/jg3zkhyi9nv461twx6m3b/h?dl=0&rlkey=uz56kmz9o8mwowsz9c3rim9of
Quoted from Jeffswack:Fix; loose cn19 connector! Thanks for the help folks
Glad that worked (Facebook post)
That orange connector my first pin, my first switch troubleshooting experience
Quoted from splickety_lit:My plunge has been clunky on a soft plunge ever since I got it. However the auto-plunge and a full plunge works fine. I made sure the plunger tip was hitting the center of the ball when resting in the lane, but the problem was still happening. Finally took some slow motion video and think I found the cause:
https://imgur.com/a/cVGsENs
The ball starts to go off course at the end of the switch slot in the shooter lane. I ran a ball across there and felt a bump. It might be hard to see from the picture, but there is definitely a hump there. And the clear is cracked in that spot, probably because the ball has been hitting it:
[quoted image]
I'm assuming when an auto-plunge or full plunge happens, the ball is either launched over the hump or has enough velocity/momentum to keep it going straight when it hits it.
I think getting a Cliffy protector will fix this if the hump is low enough. If not, I'll try sanding down the hump.
Bump post on this, as I'm searching for a solution for the ball rattling the outlane on manual plunges.
Tried and true resolution here I can be referred to?
(I'm apparently not searching with the right keywords)
Quoted from chuckwurt:Nothing is going to make it perfect. Just align the plunger as best you can and make sure the game is level. Try using a slo mo video to possibly show if any issues are apparent. If nothing noted, you probably have it as best as it’s gonna get.
So, I cracked the table open to see about alignment… shifted the playfield as far right as it would go, which aligned the plugger dead center.
It helped but not bulletproof, and it moved a bit during play. Cut an old ring and stuffed in the gap, been stead since and have a lot less ‘misfires’
E22F9768-BD50-4FFB-9547-90720D82F773 (resized).jpegEBFB9A79-801A-41D2-8834-1E95D338DD68 (resized).jpegQuoted from FatPanda:Am I missing anything else?
[quoted image][quoted image][quoted image]
This made me lol pretty good.
As I read all that, I’m like, cmon dude just let it go already. I feel like saying… ummm, you don’t even have to solder if your heat shrinking..
(Ducks and covers) haha
You're currently viewing posts by Pinsider cigarman79.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club?tu=cigarman79 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.