I was wondering how the LE/Prem Building mech is attached to the playfield? I hope it’s 4 stationary metal posts w/ 4 nuts. but my gut tells me Stern just used 4 screws into the wood.
Anybody have a picture of the underside of the playfield showing how the building mech is attached?

From looking at these pics… I believe there is a metal plate surrounding the building mech hole with 5 holes that are used for the wood screws.

This will add good support for the area. and prevent warping. I also think the building mech, then attaches to this plate via 4 stand-offs with nuts… I like what I see!

Mezelmods has them in stock;

https://mezelmods.com/products/pinball-cabinet-assembly-blades?_pos=24&_sid=68805e9f7&_ss=r

Jkush18 “ My only complaint is my ball gets stuck on soft plunges in between the mechagodzilla turn table and the back of the scoop”

This was my solution…

https://www.amazon.com/gp/aw/d/B0872PQYT8

6A6C2AC2-FD7A-4B04-9E32-1B7095252A4C (resized).jpeg7DC242C2-84C9-452D-8787-BCCD8D50B742 (resized).jpeg7F6363FC-D8D2-4518-B7D0-355C9F8EFC3B (resized).jpegA910AA10-9D5D-40D4-8315-2CDAFC61FB7D (resized).jpegFDE5AA7D-34B6-4F3E-84CD-8EF6FD7A9D58 (resized).jpeg

There is an expressway (roadway) in Japan that goes right through a building. So I think the roadway decal suits the right ramp best.

KME had to know about the expressway in Japan before he put the wire forms through the building mech. If not, it is quite a coincidence…

77DE618D-D337-4575-ADF3-3E082E33D7B6 (resized).jpegD4FC7CCC-B4AD-4D6A-B2C2-DCA59DB11F18 (resized).jpegF89BC068-AD54-4EBC-B823-6673FCD47589 (resized).jpeg0CD54654-CF44-445A-BF4C-DDE967D1FEA7 (resized).jpeg39F8C91D-E2B0-4B31-B8C8-2A2675073AD2 (resized).jpeg07B6C028-32A7-4BBA-9FA2-8D86A2F5CE9F (resized).jpeg