Quoted from TheOriginalWiz:Yes I do - I found my shooter problems were from a shooter rod was not hitting the ball squarly. I had to move a washer to the outside of the left screw to shift the shooter rod over so it would not hit the right side of the ball all the time. I also cleaned all the factory gunk off the rod so it wasn't so crunchy.
My shooter tip was actually hitting the right prong of the auto-shooter. Not wonder there wasn't any finesse or control over my plunges! Removing the two red lowest lock screws and loosening the others I was able to slide the whole assembly to the left and get it right in the middle of the ball. The I tightened the main screws and reinstalled the red lock ones, which went in at an angle but appear to be doing their job.