Quoted from Kevlar:External active sub.
Haha I ment base like default not bass like a subwoofer. Any recommendations for speakers?
(Topic ID: 300354)
Linked Games
Godzilla (Limited Edition)
Stern, 2021-
Godzilla (Premium)
Stern, 2021
-
Godzilla (Pro)
Stern, 2021
Topic Gallery
Quoted from Kevlar:How does your bridge hold balls? do you mean its collapsed but the gap isn't large enough for a ball to pass through?
Yes, that’s it.
Kelowna, BC
Quoted from HoakyPoaky:This question got buried many pages back, but I'm looking for the "mintnilla" sticker that some people randomly received in their goodie bags.
If you you have one & are open to selling it, send me a PM
Thanks!
I contacted stern, they only came in the pro games, or at least that's the response I got.
Code Champion - What is this? I know it is new, but what is the ruleset to beat it?
Thanks and sorry if this is a simple/dumb question.
Quoted from IODMako:Code Champion - What is this? I know it is new, but what is the ruleset to beat it?
Thanks and sorry if this is a simple/dumb question.
I think it's just a nice tribute to Lyman. Unattainable any other way except being Lyman.
Link to his memorial service is here:
https://pinside.com/pinball/forum/topic/rip-lyman/page/13#post-6744627
Quoted from PinMonk:I think it's just a nice tribute to Lyman. Unattainable any other way except being Lyman.
Link to his memorial service is here:
https://pinside.com/pinball/forum/topic/rip-lyman/page/13#post-6744627
That is awesome. Never knew of the guy but it seems everyone loved him. RIP.
Quoted from Hayfarmer:I contacted stern, they only came in the pro games, or at least that's the response I got.
Well good to know, but still looking for one
I know, I want one too. So, after you get one, I'd like the next one. I have a portion of game room wall with game trinkets I've gathered thru the years
Quoted from HoakyPoaky:This question got buried many pages back, but I'm looking for the "mintnilla" sticker that some people randomly received in their goodie bags.
If you you have one & are open to selling it, send me a PM
Thanks!
For reference...
GOODIE-BAG-mintnilla-sml.jpg
Newbury, OH
Quoted from splickety_lit:Nobody has mentioned the goat yet.
The one driving the saucer? It was clipped a page or two ago...
Quoted from PinMonk:The one driving the saucer? It was clipped a page or two ago...
Oh, missed that. Obviously.
This is such a fun game to play. I’d avoided knowing anything about Planet X until playing it myself. Played a couple games this afternoon only focused on making it to that mode, got there, and beat it first time sight unseen! Such a fun mode to play and a great callout/video clip at the end of it.
D710D5DE-C317-4E42-8BAF-EF2227D2447B (resized).jpeg49B7B469-BB91-4CAE-9A84-EEBA36B9053F (resized).jpeg
Sydney
Quoted from Kevlar:External active sub.
Agree. I’ve upgraded speakers on four Pro models now, a different brand of 5.25” every time. The difference seems large on paper (the specs) but reality was the change was insignificant mostly. Maybe with heavily music-intensive machines like GoT it was better, but the only big shift comes when you add a sub. And the bigger the better.
Had something odd happen just now. Beat Gigan on ball 1 pretty quickly. Neither ramp nor the scoop were lit to qualify another mode or select city.
Do you have to play GZ multiball or something else to move cities/get new modes now?
Quoted from DeathHimself:Same for me
This is odd... If it's not a 10-character thing, is it a pro/prem/Le thing?
Quoted from Taygeta:Had something odd happen just now. Beat Gigan on ball 1 pretty quickly. Neither ramp nor the scoop were lit to qualify another mode or select city.
Do you have to play GZ multiball or something else to move cities/get new modes now?
If Tank Attack mode is ready it will be the only thing available at the scoop. Could that have been it?
Quoted from RA77:Is there a solution for stucky ball at Mecha's left arm ? I checked topic index. Thought this may be a common problem ?
[quoted image]
It is pretty common, but I haven't seen a fix yet...
Quoted from jonnyqtrek:This is odd... If it's not a 10-character thing, is it a pro/prem/Le thing?
[quoted image]
Good question. I have a Prem set to 10 letters and only has LFS
Quoted from crwjumper:If Tank Attack mode is ready it will be the only thing available at the scoop. Could that have been it?
Nope. Took the time to look through instant info and all the remaining multiballs (GZ, tank, bridge, mecha) weren’t qualified or ready to go.
So if you complete a mode without a single multiball, does it lock you out of changing cities?
Quoted from PinMonk:It is pretty common, but I haven't seen a fix yet...
Ok thanks Vic
I have played no more than 10 games and it has happened twice.
Im thinking a post may need to be installed on the plastic behind him.
Hate to complain but must say I'm disappointed that this was not corrected earlier.
Did you guys get interlock switches ?
Quoted from RA77:Is there a solution for stucky ball at Mecha's left arm ? I checked topic index. Thought this may be a common problem ?
[quoted image]
Mine got stuck there, too. I warmed up his arm with a heat gun and repositioned it out of the way. The ball rolls freely past that spot now.
Quoted from dgposter:Mine got stuck there, too. I warmed up his arm with a heat gun and repositioned it out of the way. The ball rolls freely past that spot now.
Heat gun? Shoulda used your heat ray
Quoted from RA77:Ok thanks Vic
I have played no more than 10 games and ot has happened twice.
Im thinking a post may need to be installed on the plastic behind him.
Hate to complain but must say I'm disappointed that this was not corrected earlier.
Did you guys get interlock switches ?
The post below yours with the heat gun idea sounds like a winner. I'd try that to move the arm up just a bit so the ball can roll freely past.
Yes, there was an interlock on my GZ Pro (which has already moved on to make room for Rush Pro, I was sad to see GZ go. But, such is the mentality of a pinball addict with a great game...).
Enköping
Recently installed a Godzilla Premium in a winter cold Sweden (using Godzillas Heat Ray to keep me warm). Just wanted to extend a huge thank you to all contributing to this forum. Your comments have helped me avoid a lot of of noob pitfalls (this is my first NIB, and first pinside post ever). And what a incredible game this is! Utterly incredible!
3B1F4A3B-B35C-4354-A043-25B70D4EA62D (resized).jpegC398F633-C468-4D82-9CB6-A6809B38B0C6 (resized).jpegQuoted from StarCow:Recently installed a Godzilla Premium in a winter cold Sweden (using Godzillas Heat Ray to keep me warm). Just wanted to extend a huge thank you to all contributing to this forum. Your comments have helped me avoid a lot of of noob pitfalls (this is my first NIB, and first pinside post ever). And what a incredible game this is! Utterly incredible!
[quoted image][quoted image]
Congrats on your NIB premium. It’s a great game and the code is only getting better. Be careful, NIB is an addiction, expect 2 more before the years over haha
Quoted from Taygeta:Nope. Took the time to look through instant info and all the remaining multiballs (GZ, tank, bridge, mecha) weren’t qualified or ready to go.
So if you complete a mode without a single multiball, does it lock you out of changing cities?
No. Change city will be lit right away if you complete the battle.
To light change city, you just need to do one 4 monster features (battle, tanks, Tesla, bridge)
But if you complete a battle, shoot the scoop, then choose to stay in the current city, you’re locked out of changing until another monster monitor feature has been played.
Went to my local dive bar last night to put some games on the Pro they have there. Every time I play it makes me more excited for my premium in the next run! Sadly, the Pro I played is still on 0.79 code and neither sling is working 
Quoted from PinMonk:Manual says 4-40 1/4" PFH MS - BLACK
So I found the manual and found that it’s actually the 4-40 3/16 but can’t seem to find anywhere that sells this. I appreciate your help. Any ideas where to look?
Quoted from Kenswift:So I found the manual and found that it’s actually the 4-40 3/16 but can’t seem to find anywhere that sells this. I appreciate your help. Any ideas where to look?
The difference between the two is 1/16” - I don’t think that’s going to matter.
Quoted from Lounge:The difference between the two is 1/16” - I don’t think that’s going to matter.
So I saw a post about people having an upper flipper that seems weak at times and they were told to check leaf switch gap. Mine has the issue at times. I checked the gap but not sure how large it should be. I posted a pick if anyone could chime in i would appreciate it.
20220129_092428 (resized).jpgQuoted from bowtech:Thanks. Might need to adjust my maiden too
Is it playing to your liking? If so, then I wouldn’t adjust anything.
Yesterday I could not make the upper loop shot 1 time. Dead level, I even biased game to the left to drop ball closer to flipper. Finally replaced the balls checked them for magnetism and that solved the problem. They were being held a bit longer by the magnet.
Shout out to Pinball Refinery on a most excellent job done on my newly-arrived Godzilla Premium Refinery#1. My second custom process with the Refinery and it was an absolute blast. He combines true craftmanship with first-rate customer service. If anyone is thinking of giving their Godzilla the Refinery treatment, I think it is 100% worth the investment.
Godzilla1 (resized).jpgGodzilla7 (resized).jpgGodzilla8 (resized).jpgGodzilla2 (resized).jpgGodzilla5 (resized).jpgQuoted from NJNeil:Shout out to Pinball Refinery on a most excellent job done on my newly-arrived Godzilla Premium Refinery#1. My second custom process with the Refinery and it was an absolute blast. He combines true craftmanship with first-rate customer service. If anyone is thinking of giving their Godzilla the Refinery treatment, I think it is 100% worth the investment.
[quoted image][quoted image][quoted image][quoted image][quoted image]
What color is that? Orange or red? Pictures look great.
Promoted items from the Pinside Marketplace
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
