ChipScott - Awesome Job with the Mods!
Curious what kind of timeframes people are seeing from retailers on Pros and Premiums. Anyone ordered a game recently and been given an idea?
Quoted from Frax:Curious what kind of timeframes people are seeing from retailers on Pros and Premiums. Anyone ordered a game recently and been given an idea?
Hearing pending when you ordered mid this year to 1Q of 2023 on the GZ prems.
Quoted from northerndude:Hey nice stuff.
I have a pet peeve though.... if you're gonna use cable ties, got to use flush cuts man...got the sharp hangers on the ends!!!!
Haha, fair enough.
Reason I didn't hide the bulk ends of the cable ties underneath was to ensure plenty of room for ball travel under the plastic, which there is plenty enough room...maybe I just go ahead and put them underneath. But good eye, I could have cut that one on the left much more flush! ...suppose I was just excited to get them mounted and installed.
EDIT:
Went ahead and re-cable tied the characters with the bulk end of the zip tie fashioned tightly *underneath* the plastic this time.
Actually, got a better grab all together and the ties themselves actually sit more flush than before (and all ends/edges cut flush )
Good eye northerndude , I appreciate you noticing that, it does look much cleaner.
Quoted from GroggyFrogFace:Question - does it seem like something should go here? Maybe a post sleeve instead?[quoted image]
Mine looks identical to yours
Quoted from DeathHimself:Hearing pending when you ordered mid this year to 1Q of 2023 on the GZ prems.
I haven't yet. I know it'll be a hell of a long wait, but it's better than paying a few grand in scalpers' fees. I'm just kind of mulling if I want Godzilla bad enough to permanently shelve turning a World Poker Tour into a Voltron pin, since it's looking like I'll have the money to choose one or the other, finally.
Quoted from izzy:I have a set of the Tesla Towers by Diddy. For the folks that installed them all facing forward with the back right one hanging over the ramp, have you had that arm break or feel like it will eventually get hit by the ball? I set mine up per instructions, but i like the other look better. Here is a photo (not of my game or taken by me) of the recommended setup.
thx
[quoted image]
I oriented the tower like you prefer. After a few weeks it took a ball shot and broke off the coil. I’m going to leave it as is with missing coil as I barely notice it and prefer the orientation. I had to drill a new hole in base to orient this way.
AE6F3FB7-FEDF-4C78-93E9-AC5176BB9E05 (resized).jpegQuoted from blueberryjohnson:Solution I've found for folks who have the ball trap problem on the back loop: keep jacking up the pitch and eventually it shouldn't happen anymore. Unfortunately, such an extreme pitch can mess with someone of your feeds and make certain shots harder than desirable to hit.
However, to me it's worth it to never again (I hope) have a game play out like my most recent one: Light rodan from loops midway through the first tier 2 battle which was going great only to have the ball get stuck on a slow return from loop six, followed by a tilt out when trying to nudge it out (in my experience, this is a ball trap that cannot be safely nudged free).
I made a post out of pull ties and haven't had any more problems. You make an L out of 2 tabs and feed it through the bottom. Then super gel glue to playfield bottom, holding in place with a toothpick until glue dries. Then cut off top leaving an inch or so.
PXL_20220121_143542339 (resized).jpgPXL_20220121_143811078 (resized).jpgPXL_20220121_144613667 (resized).jpgPXL_20220121_144716880 (resized).jpgPXL_20220121_144826825 (resized).jpgPXL_20220121_144826825~2 (resized).jpgQuoted from JWE:Mezel Mods Just received the shooter lane protectors.
https://mezelmods.com/collections/godzilla-pinball-mods-stern/products/pinball-shooter-lane-protector?variant=19351593353313
I looked and not in stock unfortunately
073A5591-9AB4-4ABC-94B1-C8E705CAC1AF (resized).pngQuoted from GroggyFrogFace:Question - does it seem like something should go here? Maybe a post sleeve instead?[quoted image]
Oxygen Destroyer Mod!
Quoted from BallyKISS1978:I looked and not in stock unfortunately
[quoted image]
Yeah seems like they sold out quickly.
Quoted from Gunloc:I'd like to think I ordered a set along with the skyline and plastic canvas early that morning as soon as it went on sale and I still haven't received it. I'm in no rush and will be patient, as he clearly stated this mod will take time. Looking forward to this awesome mod and will post when I receive it.
I ordered the flame speaker lights. I didn’t see the skyline and plastic canvas.
Quoted from Hayfarmer:Thx Chrome Candy, much better look!
[quoted image][quoted image]
Both are impressive, I honestly couldn't pick a favorite one over the other.
Quoted from BallyKISS1978:Man that sucks.
Looks like cointaker has some.
https://cointaker.com/products/pinball-shooter-lane-protector
Quoted from BallyKISS1978:I ordered the flame speaker lights. I didn’t see the skyline and plastic canvas.
They're there, I believe in the accessory section of his website.
Quoted from BallyKISS1978:I ordered the flame speaker lights. I didn’t see the skyline and plastic canvas.
Quoted from wtatumjr:I made a post out of pull ties and haven't had any more problems. You make an L out of 2 tabs and feed it through the bottom. Then super gel glue to playfield bottom, holding in place with a toothpick until glue dries. Then cut off top leaving an inch or so.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Innovative! Thanks for sharing. Would you link me the glue you mention? I assume it is a kind that can be safely removed without damaging the playfield art or clear. Would want to make sure I'm doing things the right way when attempting this.
Quoted from JWE:Looks like cointaker has some.
https://cointaker.com/products/pinball-shooter-lane-protector
thank you so much.
Quoted from Hayfarmer:[quoted image][quoted image]
Thank you!!
Quoted from blueberryjohnson:Innovative! Thanks for sharing. Would you link me the glue you mention? I assume it is a kind that can be safely removed without damaging the playfield art or clear. Would want to make sure I'm doing things the right way when attempting this.
I use this. Only put it on the underside where it won't matter.
PXL_20220122_005241388 (resized).jpgQuoted from Apinjunkie:They're there, I believe in the accessory section of his website.
There’s only one accessory page when I pull it up. I don’t see the other page.
Quoted from Hayfarmer:You'll want the foam as well as the canvas
I kept my foam. Can’t find the second page with the city scape.
Quoted from JWE:Looks like cointaker has some.
https://cointaker.com/products/pinball-shooter-lane-protector
They are actually back ordered at CT. I know their cart system is a bit screwy but it tells you this just as you pay and not in the cart or when you add it to the cart. However they should be getting them within a weeks time, or so I was told that from them today.
Quoted from DeathHimself:They are actually back ordered at CT. I know their cart system is a bit screwy but it tells you this just as you pay and not in the cart or when you add it to the cart. However they should be getting them within a weeks time, or so I was told that from them today.
thanks for the information.
Quoted from BallyKISS1978:I kept my foam. Can’t find the second page with the city scape.
Quoted from BallyKISS1978:I ordered the flame speaker lights. I didn’t see the skyline and plastic canvas.
The plastic canvas is listed right below where you buy the light kits (on the same page) as well as on the Accessories page.
The City Skyline design is on the Acrylic Designs page.
All of this info is right there on the Type 14 webpage.
Doug (SpeakerLightKits.com)
T14 info (resized).jpgQuoted from DugFreez:The plastic canvas is listed right below where you buy the light kits (on the same page) as well as on the Accessories page.
The City Skyline design is on the Acrylic Designs page.
All of this info is right there on the Type 14 webpage.
Doug (SpeakerLightKits.com)[quoted image]
I was looking on the accessories page. Thanks so much! Found them!!
Quoted from NovaCade:Just stopping by to say hi! After a 6 plus hour trip last night, I am officially part of the GZ club. Got our pro home and setup late last night.
Congrats! Have fun!!
Quoted from BallyKISS1978:I kept my foam. Can’t find the second page with the city scape.
Can you not use the foam that comes factory with your speakers? Or you need to grab more foam? I honestly have never ordered a speaker light kit yet, and this will be my first! I didn’t know if my factory speakers already had foam but assumed they did.
I only got the kit, canvas, and acrylic city inserts. I’ve been eyeballing this kit for a while, and ordered as soon as they were available too! Can’t wait!
Quoted from Magicmike0:Can you not use the foam that comes factory with your speakers? Or you need to grab more foam? I honestly have never ordered a speaker light kit yet, and this will be my first! I didn’t know if my factory speakers already had foam but assumed they did.
I only got the kit, canvas, and acrylic city inserts. I’ve been eyeballing this kit for a while, and ordered as soon as they were available too! Can’t wait!
I have never needed new foam. I always reuse the foam and get the canvas. Love 'em!
Just received my Flamin' Frames today! Now I just need my Godzilla Premium to arrive!
Quoted from awesome1:I have never needed new foam. I always reuse the foam and get the canvas. Love 'em!
Just received my Flamin' Frames today! Now I just need my Godzilla Premium to arrive!
awesome1 Any update from your distributor on timing for the next batch of premiums? I believe we are both in the March batch.
Quoted from CashMoney:awesome1 Any update from your distributor on timing for the next batch of premiums? I believe we are both in the March batch.
I last talked to them a couple weeks ago and they were still thinking it was going to be March. I really hope so!
Quoted from kguenther6:Hard to see from the pic. Did you cut off the lower arm or is it overhanging the ramp?
It’s hanging. I didn’t change anything except for using strong 2-sided tape to attach the back-right tower in it’s rotated position.
Quoted from awesome1:I last talked to them a couple weeks ago and they were still thinking it was going to be March. I really hope so!
Also on the same boat. March/April run here.
Quoted from Hayfarmer:Tokyo skyline. If you put it in front of the foam it's more defined. Behind, like I did, is more hazy smoke like. He explains the differences in instructions
[quoted image][quoted image]
I can't recall the skyline as an add on purchase. Is it included?
Quoted from crwjumper:Here’s mine. Works great. No issues.[quoted image]
How did you attach the back right tower?
thx
Quoted from digitaldocc:I can't recall the skyline as an add on purchase. Is it included?
It's an add on in the acrylic section
Quoted from awesome1:I last talked to them a couple weeks ago and they were still thinking it was going to be March. I really hope so!
I got an update from Stern on Thursday that Godzilla is still on for March.
Godzilla Pro building info is up and can be found here
https://pinside.com/pinball/forum/topic/signature-line-godzilla-building-release-info-
20220120_160145 (resized).jpg20220120_160204 (resized).jpgQuoted from tdiddy:Godzilla Pro building info is up and can be found here
https://pinside.com/pinball/forum/topic/signature-line-godzilla-building-release-info-[quoted image][quoted image]
That Pro building is sexy. I am definitely getting one of those hopefully.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club/page/134 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.