Quoted from Lermods:Red wire should be +. Looks to be backwards on your game.
Thanks! Ya, wasn’t lighting up. Easy fix.
Quoted from Lermods:Red wire should be +. Looks to be backwards on your game.
Thanks! Ya, wasn’t lighting up. Easy fix.
Quoted from ArcadeBar:Anybody working on a UFO pop bumper topper? Something like the top half of this guy & made to work with the stock dome light on the pop would be cool...
[quoted image]
Keep working on it. I think everyone would want one.
So uh....anybody here offer 3D scanning services? Found a perfect Mechagodzilla but it is about an inch too big.
Quoted from J85M:Finalising a design for a brushed aluminium laser cut action button plate.
[quoted image][quoted image]
Quoted from ULEKstore:Our Godzilla reptile scales Lockdown Bar Accent MOD is now available on our website, Pinside, eBay and hopefully through our distributors soon.
For all of the people designing action button plates, I'd be wary of the code changing in later revisions that the action button has more uses, so wouldn't want to be putting instructions on there.
Quoted from Lermods:Despite the high price of the game, we are trying to keep this one priced reasonably at $50 shipped.
What's the price of the game got to do with the price of a shooter rod mod?
Quoted from Tmezel:Interactive Master cannon, yellow and blue lights. [quoted image]
Will it turn and rotate? Or just light up?
Quoted from eyeamred2u:Will it turn and rotate? Or just light up?
Can't imagine it would rotate being it's so close to the side, doesn't look like there'd be enough clearance, BUT it'd be awesome if it did!!
Curious, I've seen a lot of cool Godzilla figures being used to replace the stock one in the premium version of the game, but does anyone have a measurement clearance we'd have to work with for these replacements?
I found a version I like that is 6.3 inches tall but not sure if this would be a good fit since I don't have the machine yet to test on.
That should fit in the back left. I think Mechagodzilla only has about 5.5 inches of clearance. Maybe a bit more. I am going to measure for sure tomorrow when I am at my location.
Quoted from atg1469:Curious, I've seen a lot of cool Godzilla figures being used to replace the stock one in the premium version of the game, but does anyone have a measurement clearance we'd have to work with for these replacements?
I found a version I like that is 6.3 inches tall but not sure if this would be a good fit since I don't have the machine yet to test on.
https://pinside.com/pinball/forum/topic/stern-godzilla-official-owners-club/page/18#post-6571362
Quoted from atg1469:Curious, I've seen a lot of cool Godzilla figures being used to replace the stock one in the premium version of the game, but does anyone have a measurement clearance we'd have to work with for these replacements?
I found a version I like that is 6.3 inches tall but not sure if this would be a good fit since I don't have the machine yet to test on.
you have 6" of clearance for GZ, maybe a hair more, and 5.5" for Mechag.
Quoted from atg1469:Curious, I've seen a lot of cool Godzilla figures being used to replace the stock one in the premium version of the game, but does anyone have a measurement clearance we'd have to work with for these replacements?
I found a version I like that is 6.3 inches tall but not sure if this would be a good fit since I don't have the machine yet to test on.
6.3 I feel is the sweet spot. Printed mine at 160mm (6.3in) and has the right amount of presence. Trying out 1-2 slight color variations see what works best.
2021-11-09 10.02.01 (resized).jpgQuoted from TFK:Here is our 10 piece Godzilla color guard protector set. Available soon.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Haha! The screw on the post for your left side clear plastic is out on yours, too!
Quoted from Sleal16:6.3 I feel is the sweet spot. Printed mine at 160mm (6.3in) and has the right amount of presence. Trying out 1-2 slight color variations see what works best.
[quoted image]
I like it! I’m about to buy one - how much is yours going to be?
Quoted from PinMonk:Haha! The screw on the post for your left side clear plastic is out on yours, too!
Haha..Still looking for it.
Quoted from TFK:Haha..Still looking for it.
On mine, game one I caught a glance of a piece of something sliding down the playfield in a hectic multiball. Turns out it was that screw. I eventually found it to the side of the coin box in the cabinet. Then I had to figure out where the screw came from and finally located the same post as on yours that is missing the screw, too.
Quoted from Sleal16:6.3 I feel is the sweet spot. Printed mine at 160mm (6.3in) and has the right amount of presence. Trying out 1-2 slight color variations see what works best.
[quoted image]
Which figure was this based on? Do you plan to sell these? I know someone that would be interested.
Quoted from delt31:I like it! I’m about to buy one - how much is yours going to be?
Quoted from RoyalJack:Which figure was this based on? Do you plan to sell these? I know someone that would be interested.
Its a recent licensed release in the '84 era of the movies just with the artist's own take on it...kinda like the PF artwork seems to have a few blended references as well. A little serendipitous that the figure has a lot of common traits with the PF version (at least in my opinion)
I was gauging the amount of time to print, prep and paint them...and was looking at 45 for a raw one for someone to paint on their own, and 75 for a completed one.
Quoted from Sleal16:Its a recent licensed release in the '84 era of the movies just with the artist's own take on it...kinda like the PF artwork seems to have a few blended references as well. A little serendipitous that the figure has a lot of common traits with the PF version (at least in my opinion)
I was gauging the amount of time to print, prep and paint them...and was looking at 45 for a raw one for someone to paint on their own, and 75 for a completed one.
I’d be in for a completed one. Please put me on your list if you are making one.
Quoted from TFK:Here is our 10 piece Godzilla color guard protector set. Available soon.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
What art blades are those?
Quoted from Pmaino:I’d be in for a completed one. Please put me on your list if you are making one.
I’d also be in for a completed one as well.
Quoted from Sleal16:Its a recent licensed release in the '84 era of the movies just with the artist's own take on it...kinda like the PF artwork seems to have a few blended references as well. A little serendipitous that the figure has a lot of common traits with the PF version (at least in my opinion)
I was gauging the amount of time to print, prep and paint them...and was looking at 45 for a raw one for someone to paint on their own, and 75 for a completed one.
Please put me on your list. I think it looks great.
Quoted from PinMonk:Haha! The screw on the post for your left side clear plastic is out on yours, too!
Which screw exactly?
Quoted from MUGEN_4_LIFE:Which screw exactly?
Quoted from Sleal16:6.3 I feel is the sweet spot. Printed mine at 160mm (6.3in) and has the right amount of presence. Trying out 1-2 slight color variations see what works best.
[quoted image]
I’m in for one if you’re gonna sell em!
Quoted from Gogojohnnyquack:[quoted image]
Ok Thank-you that's what I thought. What purpose does that screw serve when present?
Anyone working on a decal for the building or a sculpted top of the prem/LE building? I hate the cheap plastic look for the building and imagine the top being printed to work with the mech is possible and that three vinyl decals in addition to cover the screws and make our building appear a little more premium would be a huge benefit to our games.
Also looking for a Godzilla figure with a fire led illuminating the bridge rather than just the static figure. Just mounting an led inside his mouth would be great LERMODS has there version but I wanted a more playfield art specific figure with a fire stream instead of blue hot stream. Id also be cool with no stream as long as I could get the three tiny leds chasing out of his mouth reflecting onto my bridge mod also soon to be announced I hope .
Quoted from MUGEN_4_LIFE:Ok Thank-you that's what I thought. What purpose does that screw serve when present?
Anyone working on a decal for the building or a sculpted top of the prem/LE building? I hate the cheap plastic look for the building and imagine the top being printed to work with the mech is possible and that three vinyl decals in addition to cover the screws and make our building appear a little more premium would be a huge benefit to our games.
Also looking for a Godzilla figure with a fire led illuminating the bridge rather than just the static figure. Just mounting an led inside his mouth would be great LERMODS has there version but I wanted a more playfield art specific figure with a fire stream instead of blue hot stream. Id also be cool with no stream as long as I could get the three tiny leds chasing out of his mouth reflecting onto my bridge mod also soon to be announced I hope .
Yeah, wish I had the same comfort level with sculpting as I do with CAD, else I'd mess with the mouth to do more with it. I know someone is hand sculpting a model with atomic breath, and doing the injection molding to produce them. I'm eager to see how that turns out.
That being said, I got my static figure decently set with the color process.Used a translucent blue to leave the fins unpainted. In the end since his back is away from the player, kinda doesnt matter since its dark back there and super out of line of sight. I like my eyes red, but think a bright blue would look fine there as well.
2021-11-12 18.22.07 (resized).jpg2021-11-12 18.35.55 (resized).jpg2021-11-11 16.58.24 (resized).jpgQuoted from Sleal16:Yeah, wish I had the same comfort level with sculpting as I do with CAD, else I'd mess with the mouth to do more with it. I know someone is hand sculpting a model with atomic breath, and doing the injection molding to produce them. I'm eager to see how that turns out.
That being said, I got my static figure decently set with the color process.Used a translucent blue to leave the fins unpainted. In the end since his back is away from the player, kinda doesnt matter since its dark back there and super out of line of sight. I like my eyes red, but think a bright blue would look fine there as well.
[quoted image][quoted image][quoted image]
Im trying to hold myself back from buying yours its so damn good! If I could just get that mouth spitting flames! It honestly isn't a make or break but man it would look awesom if done correctly! I'll definitely keep you in mind... I've gotta short patience issue hahahah!
Quoted from Sleal16:Yeah, wish I had the same comfort level with sculpting as I do with CAD, else I'd mess with the mouth to do more with it. I know someone is hand sculpting a model with atomic breath, and doing the injection molding to produce them. I'm eager to see how that turns out.
That being said, I got my static figure decently set with the color process.Used a translucent blue to leave the fins unpainted. In the end since his back is away from the player, kinda doesnt matter since its dark back there and super out of line of sight. I like my eyes red, but think a bright blue would look fine there as well.
[quoted image][quoted image][quoted image]
Freaking amazing. Definitely interested. Please keep me posted on price and availability.
Quoted from Tmezel:MEZELmods
Concept rendering and first prototype of the oxygen destroyer.[quoted image][quoted image]
All those Mezel Mods Look kick ass !!!
Quoted from ULEKstore:Lockdown Accent Bar redesign. No more "sheat ray".
Thanks for everyone's feedback.
[quoted image]
Looks Great so far, but can you make the letters yellow so they stand out? The green letters on a green background kind of camouflages them.
Quoted from Sleal16:Yeah, wish I had the same comfort level with sculpting as I do with CAD, else I'd mess with the mouth to do more with it. I know someone is hand sculpting a model with atomic breath, and doing the injection molding to produce them. I'm eager to see how that turns out.
That being said, I got my static figure decently set with the color process.Used a translucent blue to leave the fins unpainted. In the end since his back is away from the player, kinda doesnt matter since its dark back there and super out of line of sight. I like my eyes red, but think a bright blue would look fine there as well.
[quoted image][quoted image][quoted image]
Wow the translucent blue looks great. What about leaving the eyes blue like Zombie Yeti art and adding LED light inside underneath to make eyes and tail glow when attached to an appropriate source. You can leave the tail leading up on top of head unpainted as well as eyes to see them glow blue. With or without the light I am in.
Can anyone make a transparent card to put over qr ? I'm not hooking up to it and it's ugly on such a pretty game. Not sure what to put on it, but I miss having artwork over there
Quoted from Hayfarmer:Can anyone make a transparent card to put over qr ? I'm not hooking up to it and it's ugly on such a pretty game. Not sure what to put on it, but I miss having artwork over there
-link removed-
Quoted from Tmezel:Interactive Master cannon
When
Interactive Master cannon
oxygen destroyer
?
Great mods
Quoted from Makakka:When
Interactive Master cannon
oxygen destroyer
?
Great mods
Today!
Quoted from Good-Times:-link removed-
Thought of those, but I have something coming in a day or 2 to share here, and don't want to cover it up with the wiz mods, which are great, I have them on 3 pins
Quoted from Tmezel:Today turned into last night
Are they sold out already? Doesn't show available on the website.
Quoted from Tmezel:Today turned into last night
I kept watch most of the day while working. Then at 11pm the laser and the noodle building got added. I could only order the noodle building. the Lasers showed SOLD out immediately.
Great way to keep me paying shipping and handling I guess
Magicchiz
Quoted from Txcoastal1:Would be interested what Mothra looks like under UV/Blacklight
Very cool
Finally got black lights…sadly this Mothra doesn’t glow much under UV lights. I may need to paint it.
6797AB3A-CE19-4FE8-AEB8-3B409AFA0C6E (resized).jpegWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-godzilla-mod-thread/page/7?hl=ulekstore and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.