Quoted from gumnut01:Also he have people attached the atomic breath. It seems a bit long and does not stay in there.
Do people trim? Use double sided tape or glue?
Lastly without breath, Godzilla has his head up and glares straight ahead. With breath you need to angle him down so he is less confrontational.
Even though I love the idea of the atomic breath and modding it to light up, I’m hesitant to do so if it sacrifices how good the Godzilla figure looks.
What did other people with this figure do. Add the breath and have him look down or ditch the breath?
First photo shows him upright with breath, breath sits in bridge. 2nd shows him without flame looking up. 3rd shows breath out of the way but forces him to look down. Breath is still too long here would need to be trimmed. I have Godzilla using the foot screw holes as detailed by others before.
[quoted image][quoted image][quoted image]
I attached the breath for a while but it fell out. You could glue it I guess like some suggested, but I didn’t want to ruin my figure. I don’t know why. Lol
I just didn’t want it permanently in there. Anyway, If you want to keep the head up while the breath is in, you could cut a small piece of something and stick in between his neck joint. I can’t remember but I may have stuck one in the joint above that one too. Just put something in there. I know, after I said I didn’t want to ruin my figure. Lol. Anyway I could get it out if I want with tweezers. What I used was a small rubber bumper thing. I’m not even sure what you call them. It’s like a clear dot with a sticky back. I cut it and put a piece in there. You can see it on mine but not noticeable to anybody else, if they aren’t looking. Up close u can. See pic 2 but pic 3 it’s tough to see.
0041A10E-B960-450B-8FDA-446C955FD53C (resized).jpeg1F2AAF3C-0282-4B63-A367-59E94B533502 (resized).jpegBA2422A4-7119-4E3F-874A-25E4933B2655 (resized).jpeg