Quoted from schudel5:Yep. Replaced both in my Metallica with Williams stops after the left one failed. Replace and move on.
Williams coil brackets are different. Put them "back to back" and you'll see the mountings are about 1-2mm different.
rd
You're currently viewing posts by Pinsider rotordave.
Click here to go back to viewing the entire thread.
Quoted from schudel5:Yep. Replaced both in my Metallica with Williams stops after the left one failed. Replace and move on.
Williams coil brackets are different. Put them "back to back" and you'll see the mountings are about 1-2mm different.
rd
Quoted from Zitt:I'm 100% sure it's the buttons themselves; seen it many times. The button is depressed; and the switch is closed. Doesn't look like a coil stop on mine.
Some of the new buttons are very tight and can stick. The clear ones from PBL are very "sticky". Some people dismantle them and sand the shaft down a little. I find a spray of silicone spray works well.
rd
You're currently viewing posts by Pinsider rotordave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/stern-faulty-coil-stops?tu=rotordave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.