Here is a image sheet I made up which can be used to print on waterslide decal material to replace the backbox badge with an alternative graphic. They are sized appropriately to allow the whole thing to be printed on standard 8.5 x 11 paper (amazon, white backing, $15/20 sheets) and then cut to fit the 4-7/8" wide acrylic badge shipped with every stern machine. I have attached the JPG and the PDF for half a dozen games. Just print, trim, and apply to a piece of clear plastic. (UpkickPinball has the template now setup). I'll be posting some examples of the finished badge this weekend.

Pinball-badges-printdecal.jpg

Pinball-badges-printdecal.pdf

Here is a finished badge prototype. The above image was reverse printed on clear waterslide, and then applied to a blank badge made by upkick pinball. I then sprayed Krylon jungle green paint. This will replace the Stern badge on the backbox with two screws. A simple mod and the graphic can be anything.

IMG_1751 (resized).jpg