Terminator 2: Judgment Day
Williams, 1991Hi.
I have a start button light out on a T2 machine. Everything looks fine. Wires look good etc. The start button light connects to J138 and J135. Everything on the power drive board looks great. I just can't get the light to work. Machine is in great working condition.
Any suggestions? Any additional tests I can/should run?
Thanks!
Tz
did you check the bulb? start with the simple things first. All three of my button lights were out on my BW
Quoted from fatality83:did you check the bulb? start with the simple things first.
+1 on that!
I just had the same problem when I bought mine. I had no power at the socket lamp. Coindoor interlock board was fine. Went to backbox and the J135-5 wire was loose. I gave it a little tug and it came out. Reseated the wire in the connector and like magic it worked. 
Not saying that is your problem but it could be.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/start-button-light and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Manchester, PA