Starship Troopers
Sega, 1997You're currently viewing posts by Pinsider pbjack.
Click here to go back to viewing the entire thread.
Hi,
It could be your RAM in U4. I had a similar issue on my A13 and changing the RAM fixed it. It also fixed the problem for a fellow pinsider so it's worth a try 
Jack
https://pinside.com/pinball/forum/topic/goldeneye-no-sound#post-2972307
Hi Brian,
I would definitely try a new U4 as these chips are relatively cheap. Check the number on your chip and get the same thing from pinball center. The spec for the CPU/Sound Board says 6116 RAM part number 105-0052-05.
http://www.pinball.center/en/shop/electronics-parts/ic/1233/ic-6116-ram
Good luck,
Jack
You're currently viewing posts by Pinsider pbjack.
Click here to go back to viewing the entire thread.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside
Montréal, QC
Sun Valley, NV