Hi all, I have an issue with a Stargate. This machine was and had been working with no issues prior to moving it from one location to another. When starting up the dmd comes on for a quick second then goes out. GI lights come on and then everything shuts off. I’ve tried the obvious stuff... reseating chips, cables, etc with no luck. Tried booting without DMD connected and still getting the same result. Any advice is appreciated.

Yes, even held switch manually and powered on.

Yes, pulled fuses and checked.

Thanks Cycloneman I checked everything and can’t see anything that looks kinked/damaged and all fuses tested good. I’m thinking it’s a power supply issue or a short somewhere. I’ll keep at it.

Thanks guys...Had to step away from this for a few days as it was driving me crazy. DMD was disconnected and reconnected with power off. I read somewhere a bad dmd could cause the machine to bog down so I wanted to try that. All fuses have been pulled and checked and all tested good. Didn’t check the power box fuse, I’ll try that next.