The Mandalorian (Pro)
Stern, 2021I am making wireforms to replace the plastic ramps on Mandalorian Pro machines. This is the see it built thread. This is the way! Starting initial set today.
93F56715-5B16-43F4-845D-355284877A82 (resized).jpegA794B1B4-3E5E-48C2-843E-D110CFA05437 (resized).jpeg
D433F6D3-117A-4149-BEA9-8A38488043E1 (resized).jpegEAE2D4F6-B33C-42A1-888B-42C755F9D856 (resized).jpeg
Quoted from Deadpool66:Make me a set while your at it
//<![CDATA[
window.__mirage2 = {petok:"0c2ecaa144e37c93007507a0fa0599689c4765a8-1625609962-1800"};
//]]>
I will be selling them at Allentown pinfest. Posting the build as a timestamp as I go tonight. Left rail lower picture.
03AB5A21-75FF-41B9-93A3-C53B85BBAD0F (resized).jpegQuoted from Indypin:You’re going to make a lot of pro owners happy. Good luck!
Hell, now I want a Mando just to upgrade to these!
The spots where you slide the wireforms into the plastic ramp, is that plastic ledge the ramp sits on going to stress and break over time? Anyway to reinforce that?
Quoted from chuckwurt:The spots where you slide the wireforms into the plastic ramp, is that plastic ledge the ramp sits on going to stress and break over time? Anyway to reinforce that?
I thought same thing. Checking that out. Would be easy to add a plate to even pressure. Stern should just sell the ramps. It looks way better and I am a moran doing it by hand. I want to make a basic set then a fancy set. This first attempt is to work out some things to get it down. The rails are flat bar welded at bottom which creates a narrower ball guide. The ones I have always made were half circle for deeper runs. The one ramp is low to playfield and I am guessing thats why these are narrow. The half moons would be too close to playfield. Stopping for today as I have to take care of my son. Brand new game and I have not even played it. I will with wireforms. The plastic ramps are just hideous. Not done with the left, but stopping at this point for today. The pro is a beautifull looking game. My wife wants the premium which we ordered. I bought this to see if I could make a nice set of pro ramps.
0F7ECDAD-E67F-46D2-958D-74C27FFFDEDC (resized).jpeg67BFB7CB-60E6-4E91-A960-AF9A7BB807DA (resized).jpegEA49B8BA-0AED-477B-BB98-F75904DD6891 (resized).jpeg
You can see how low that right ramp sits to playfield so its tight. Going off pictures I see Stern has a blocker on upper part of the ramp that goes to left drop to keep the ball on track. Without it the ball goes right off it alot. I need to find that sweet spot. The one I tried kicked it to left. Kicking around ideas for it now. Will keep posting the good and bad until its done right. Using 1/16 stainless steel rods. Tricky to weld, but they look great when done and they wont rust and easy to clean and polish.
And I put on side armor for pinfest. Did not put screws in by buttons only the rails are tight to cab. I will be taking them off after the show. But, they actually look good. The machine is really beautifull in person. More then I expected.
60EF6C78-DC36-4E91-B940-24BF61653784 (resized).jpegF1F5C359-E956-4694-972C-0A84136E9436 (resized).jpeg
Quoted from Vino:Someone that has received their LE should shoot over a closer image or two for this guy.
Good luck.
Found an LE ramp picture for reference.
DAE19A2C-64BD-4759-9F2C-4CFEB9CD1948 (resized).pngI can do better on the ball drop and I will, but this first set is to get them down. I am doing this by hand so a machine would be crisper bends and welds.
06C3D822-7E6F-4D07-B370-241AEF73BFE5 (resized).jpeg190C8C56-ED5A-4CCD-BB1C-10DAA750420F (resized).jpegBCFDAFCF-C0A7-46A5-8BE3-B6912CCEAE72 (resized).jpegD270E545-E81C-4ECE-B94A-8B753BDB02CE (resized).jpeg
Quoted from Loganpinball:I need smaller screws. I am using the ramp spacer with screw for now, but the left is done and works great.
[quoted image]
Why not continue the "deflector section" all the way down to the ball drop? It would look more unified.
Quoted from gdonovan:Why not continue the "deflector section" all the way down to the ball drop? It would look more unified.
Stern put a smaller deflector. I could not get that sweet spot so I started it at ramp and down rail. It works great.
9F1DE38D-190D-4B49-9991-05381A95F712 (resized).jpegI am redoing the left ball catch to match the right. Its been a while and I forgot to do it the way I did for right side drop. Rails work great!
2E41ADF1-80D6-48BA-8F3D-B7EA66F2EC62 (resized).jpeg4F073F16-F7CC-4024-B524-9A2B7C6DD85F (resized).jpeg713DCE7B-20AB-4960-8C2A-CE2EC8D95A0E (resized).jpeg9310C5FF-A23B-4485-BEC9-DC535A43BD34 (resized).jpeg956F27BF-E854-45AF-B343-ACEC82314275 (resized).jpegE9410190-20B0-4940-B160-44B8634C643E (resized).jpegWow, really impressive work. When I played a pro, I was disappointed by how certain inserts were really hard to see/read because of the clear ramps, so this is an amazing improvement to have available.
Making new left ball drop guide adding whistling birds on top. I bought new tungsten rods and they are not as good as the ones I need. Going to do this again with less rockets. I like the idea, but working it out.9
1EF4C6BD-7676-430B-9F80-D1D17958CDEE (resized).jpegC15E1B55-1977-43CE-BD90-AD48FF3DA07F (resized).jpegE5076A59-AAE5-4C35-A03D-6BB649B3B020 (resized).jpeg
E8ECC828-9DA3-4658-AA2E-25DC16760218 (resized).jpeg1C348914-A779-47A2-8776-E11972EC69E4 (resized).jpegQuoted from Loganpinball:Stern put a smaller deflector. I could not get that sweet spot so I started it at ramp and down rail. It works great.[quoted image]
Yeah but stern's is to catch the ball dropping from the right ramp.. you're dealing with falls just due to the orientation/shape of your rails.
Quoted from Loganpinball:Making new left ball drop guide adding whistling birds on top. I bought new tungsten rods and they are not as good as the ones I need. Going to do this again with less rockets. I like the idea, but working it out.9
[quoted image][quoted image][quoted image]
[quoted image][quoted image]
Like the concept - but please don't block the top of the slings/inlane! Bad area to obscure.
Quoted from flynnibus:Like the concept - but please don't block the top of the slings/inlane! Bad area to obscure.
Agree, cool idea but would block sight in a critical area
Quoted from flynnibus:Yeah but stern's is to catch the ball dropping from the right ramp.. you're dealing with falls just due to the orientation/shape of your rails.
I put the ramp on without the wall and more than half of the shots the ball flew off track onto playfield. This set is just for my machine. I agree with blocking view its too much. The ones I am trying to sell will be basic without any artistic crap on them, just decent wireforms. I am shooting for ten sets for pinfest. I have 3 people interested at this point. So we will see if theres more. I just have to figure out the materials and time for a price. I have to see, but $100 or less is my goal. I will install and play test every set I make.
I have followed you other posts on your projects. I think you are getting a bit to artistic on the habitrails. For your own sake and and your customers, keep it like Stern would do it.
based on your initial test, they will turn out nicely and you will sell one set for each pro. 
Quoted from desertT1:I want one. Won’t be anywhere out East any time soon though. Put me on the shipping option list.
Pm sent. Anyone else that is interested please let me know and I will keep your info. I figured out all the costs on my end and I will sell them for $90. That also covers my time and I hope thats a fair price.
Making guides and going to make all the shapes then weld together. Going assembly line style thinking it will save time. I will post these in market place soon. The few that asked first will get these sets. I need to bring a bunch to pinfest. So unless I really bang out a bunch thinking the first 5 can be shipped out. After that I want to bring the rest to pinfest. If I sell everyone made I will be making them as requested from there out. Thanks for the feedback and suggestions. The game is great, better then I expected. Finally a great star wars game has been made!
Quoted from JWE:Found an LE ramp picture for reference.
[quoted image]
If that's real and not a photshop for a marketing mockup....Stern has somehow managed to cut even more corners than before by removing the little metal plate that's typically riveted on to prevent cracking, and instead just extending the ramp body down and drilling the holes to insert the wireform. /facepalm
Quoted from Frax:If that's real and not a photshop for a marketing mockup....Stern has somehow managed to cut even more corners than before by removing the little metal plate that's typically riveted on to prevent cracking, and instead just extending the ramp body down and drilling the holes to insert the wireform. /facepalm
I can’t see that decision faring well down the road…
Quoted from LORDDREK:I can’t see that decision faring well down the road…
It's really a question of how thick it is. The thicker, the better, and less prone to cracking, but still...it just seems cheap.
Quoted from Frax:If that's real and not a photshop for a marketing mockup....Stern has somehow managed to cut even more corners than before by removing the little metal plate that's typically riveted on to prevent cracking, and instead just extending the ramp body down and drilling the holes to insert the wireform. /facepalm
Pretty sure this is not new... plus, it's not like we haven't been just screwing ramps together forever either.
Please let me get this process settled. I am not done making two sets yet. I am close. But I might have to bump up the $90 price to cover my time. I will nail it down soon. Just give me a few days to lock down exact price. I am not looking to get rich at all. I put a stop watch on theses to track it.
07BE27DB-FA60-44B1-A08E-7F47D93A0953 (resized).png66EBB72A-49E4-4232-B742-F0CF86B054F6 (resized).jpegQuoted from Loganpinball:Please let me get this process settled. I am not done making two sets yet. I am close. But I might have to bump up the $90 price to cover my time. I will nail it down soon. Just give me a few days to lock down exact price. I am not looking to get rich at all. I put a stop watch on theses to track it.
[quoted image][quoted image]
Sounds good, I sent you a PM already but thought I would comment as well. Keep up the good work.
Quoted from Loganpinball:Please let me get this process settled. I am not done making two sets yet. I am close. But I might have to bump up the $90 price to cover my time. I will nail it down soon. Just give me a few days to lock down exact price. I am not looking to get rich at all. I put a stop watch on theses to track it.
[quoted image][quoted image]
Marco/Stern is charging something like $330+ for the set, so anything lower is an improvement.
Quoted from Loganpinball:Please let me get this process settled. I am not done making two sets yet. I am close. But I might have to bump up the $90 price to cover my time. I will nail it down soon. Just give me a few days to lock down exact price. I am not looking to get rich at all. I put a stop watch on theses to track it.
[quoted image][quoted image]
Don't sell yourself short. People pay asinie prices for mods that are basically toys and decorations whereas this is a functional mod that improves line sight of the ball. When I played the pro on location I thought those clear ramps were horrible and blocked the view of the PF. I don't mind plastic ramps along the side of the PF but when they start to cross they should be wireforms.
Quoted from GoodOmens:Marco/Stern is charging something like $330+ for the set, so anything lower is an improvement.
Stern P/Ns:
515-2378-01
515-2378-02
Quoted from GoodOmens:Marco/Stern is charging something like $330+ for the set, so anything lower is an improvement.
If you could order them, they would be plated though right?
Quoted from November:Nice !
What is the diameter of the wire ?
Thanks !
303 stainless 1/16 rods.
Wow. $338 for the 2 main wire forms and $290 for the premium side armor. The LE price isn't looking so bad now... 
Quoted from Deadpool66:Any worries about the balls getting scratched on the wireform?
Surface is smooth and ball drops are also smooth. Should not be a problem.
Quoted from Waxx:If you could order them, they would be plated though right?
Yes sterns are chrome plated. Which is why its so expensive. Stainless steel is easy to clean and polish to a good shine. But, if you want chrome plated forms the Stern is the way to go. I have wireforms on my Discovery machine for a year now and they have not created any issues. I love the game, they did a great job at Stern. I knew I could make them and wanted to see how they looked and figured I would see if anyone else would be interested. I am shocked at the list of people I have gotten in two days.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/star-wars-mandalorian-pro-wireforms-this-is-the-way?hl=jkaping and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Monticello, MN
Bavay